Panasonic SA-PTX7P, Руководство по обслуживанию

Страница: 50 / 213

10.2.1. Service Mode Table 1
FL Display
Key Operation
Front Key
Item
Description Mode Name
Error code
check
To clear the error code,
press [0] for 5 seconds
or more.
In SERVICE mode, press [1]
button on the remote control
unit. Error code will be shown
on the FL Display.
In SERVICE mode, press [2]
button on the remote control
unit.
Error code check
The latest error code stored in the
EEPROM IC is displayed.
Note: Refer to "Section 10.7. DVD Self
Diagnostic Function-Error Code" for
more detailed information on the error
codes.
Error code no. Error code
record
By pressing the up/down key on the remote
control. You can view the next or previous
error codes present.
When there is no error present, the FL
display shows as below:
Service mode
entering
To exit, press [POWER]
button on main unit or
remote control.
To exit, press [POWER]
button on main unit or
remote control.
In STOP (no disc) mode,
select DVD/CD and press
[STOP] button on the main
unit, followed by [ 10] button
and [0] button on the remote
control unit.
To enter into service mode.
Main
micro-processor
firmware version no.
(Display 1)
(Display 1)
Sub micro-processor IC (Digital P.C.B.)
firmware version no. for YYY. ZZ is for
the checksum no. if EEPROM IC
is present.
(Display 2)
(Display 2)
Kernel firmware version
(Display 3)
Miniboot version no.
(Display 4)
Fs version no.
(Display 5)
DSP MICRO-PROCESSOR IC
FIRMWARE VERSION
(Display 6)
Misty key no.
(Display 7)
Micro-processor
firmware version
display &
EEPROM
checksum
display.
Press [FL Display] button on
remote control unit for next
page. (FL Display)
Micro-processor firmware version
display & EEPROM checksum display.
EEPROM checksum is only available
due to existence of EEPROM IC.
FL Display sequence:
Display 1 2 3 4 5 6 7.
50
SA-PTX7P