1.3. Before Repair and Adjustment
Disconnect AC power, discharge Power Supply Capacitors C609, C658, C900, C901, C902 & C909 through a 10
Ω
, 1W resistor to
ground.
DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices.
After repairs are completed, restore power gradually using a variac, to avoid overcurrent.
·
Current consumption at AC 230 V, 50 Hz in NO SIGNAL mode should be ~300 mA. (E/EG)
·
Current consumption at AC 230-240 V, 50 Hz in NO SIGNAL mode should be ~300 mA. (EB)
1.4. Protection Circuitry
The protection circuitry may have operated if either of the following conditions are noticed:
·
No sound is heard when the power is turned on.
·
Sound stops during a performance.
The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are
"shorted", or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used.
If this occurs, follow the procedure outlines below:
1. Turn off the power.
2. Determine the cause of the problem and correct it.
3. Turn on the power once again after one minute.
Note:
When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again.
1.5. Safety Part Information
Safety Parts List:
There are special components used in this equipment which are important for safety.These parts are marked by
in the
Schematic Diagrams & Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s
specified parts to prevent shock, fire or other hazards. Do not modify the original design without permission of manufacturer.
Table 1
Reference No.
Part No.
Part Name & Description
Remarks
A2
K2CQ2CA00002
AC CORD
[M]EG E
A2
K2CT3CA00004
AC CORD
[M]EB
L8
G0C101KA0029
AXIAL COIL
[M]
L600
G0B371HA0005
LINE FILTER
[M]
L800
G0C3R3JA0027
COIL
[M]
L801
G0C3R3JA0027
COIL
[M]
L900
G0C3R3JA0027
COIL
[M]
L901
G0C101JA0027
COIL
[M]
L950
J0JBC0000019
CHIP INDUCTOR
[M]
LB321
J0JBC0000015
CHIP INDUCTOR
[M]
T601
G4CYAYY00142
TRANSFORMER
[M]
IP800
K5G251A00008
FUSE PROTECTOR
[M]
F1
K5D631BLA012
FUSE
[M]
FP300
K5G502A00039
FUSE PROTECTOR
[M]
JK600
K2AA2B000011
JK AC INLET
[M]
5
SA-PM4E / SA-PM4EB / SA-PM4EG
Содержание SA-PM4E
