Panasonic SA-PM37MD, Руководство по обслуживанию

Страница: 83 / 180

Pin No. Mark I/O Function
26 RMC IN I Remote controller input
terminal
27 SYNC/HALT I Power-failure detect
pulse input terminal
28 CD OP SW I CD tray open detect
switch input terminal (H
:Open, L:Close)
29 CD_REST
SW
I Rest switch input
terminal
30 CD_BLKCK I CD sub code block
clock input terminal
31 MD CS I MDCS input terminal
32 CD_STAT I CD status signal input
terminal
33 MICON RST I Microcomputer reset
signal input terminal
34 NC — Not used/Open
35 CD RESET O CD reset signal input
terminal
36 CD_MLD O Not used/Open
37 CD_MDATA O CDLSI command load
signal output terminal
38 CD_MCLK O CDLSI command data
signal output terminal
39 NC — CDLSI command clock
signal output terminal
40 LCD_RST O LCD reset signal output
terminal
41 LCD CS O LCD chip select output
terminal
42 LCD DATA O LCD data output
terminal
43 NC — Not used/Open
44 LCD CLK O LCD clock output
terminal
45
MD_DATAOUT O
MD data output terminal
46 MD_DATAIN I MD data input terminal
47 MD_CLK O MD clock output
terminal
48
MD_LOADSW
I MD loading switch
input terminal (H:
Switch off)
49 MD_RST O MD reset output
terminal (L: Reset)
50 MD_REQ A O MD request signal
output terminal
51 NC — Not used/Open
83