Panasonic SA-PM37MD, Руководство по обслуживанию

Страница: 76 / 180

terminal
Pin
No.
Mark I/O Function
27 TBAL I Tracking balance signal
input terminal
28 FBAL I Focus balance signal input
terminal
14.7. IC702 (MN662790RSC) SERVO PROCESSOR / DIGITAL SIGNAL
PROCESSOR / DIGITAL FILTER / D/A CONVERTER
Pin No. Mark I/O Function
1 BCLK O Bit clock output for
serial data
2 LRCK O L/P clock signal output
3 SRDATA O Serial data output
4 DVDD1 I Power supply input (for
Digital Circuit)
5 DVSS1 I Ground (for Digital
Circuit)
6 TX O
Digital audio interface
signal output
(Latches data at first
transistion)
7 MCLK I Microprocessor
Command Clock Signal
Input
8 MDATA I Microprocessor
Command Data Signal
Input
9 MLD I Microprocessor
Command Load Signal
Input
10 SENSE I
Sense Signal Output
(OFT, FESL, MAGEND,
NAJEND, POSAD, SFG)
(Not Used, Open)
11 /FLOCK O
Focus Servo Feeding
Signal Output
(“L”: Feed)
12 /TLOCK O
Tracking Servo Feeding
Signal Output
(“L”:Feed)
13 BLKCK O
Sub-Code Block Clock
Signal Output
(fBLKCK = 75Hz during
Normal Playback)
76