file:///C|/Documents%20and%20Settings/Administrator/Plocha/PANASONIC%20SA-PM27E/s1300000000s.htm
●
The voltage value and waveforms are the reference voltage of this unit measured by DC electronic
voltmeter (high impedance) and oscilloscope on the basis of chassis. Accordingly, there may arise
some error in voltage values and waveformsdepending upon the internal impedance of the tester
or the measuring unit.
No mark ...Playback < > ...FM
(( ))
...CD
( )
...AM
●
Importance safety notice:
Components identifed by
mark have special characteristics important for safety. Furthermore,
special parts which have purposes of fire-retardant (resistors), high-quality sound (capacitors),
low-noise (resistors), etc. are used. Whenreplacing any of components, be sure to use only
manufacturer’s specified parts shown in the parts list.
Caution!
IC, LSI and VLSI are sensitive to static electricity.
Secondary trouble can be prevented by taking care during repair.
●
Cover the parts boxes made of plastics with aluminium foil.
●
Put a conductive mat on the work table.
●
Ground the soldering iron.
●
Do not touch the pins of IC, LSI or VLSI with fingers directly.
file:///C|/Documents%20and%20Settings/Administrator/Plocha/PANASONIC%20SA-PM27E/s1300000000s.htm (2 of 3) [14.6.2003 18:45:22]