Section
Code
Meaning
Note
Microcomputer
error
F700
MBX overflow
When replying a message to Disc Manager. (operation
continues)
F701
Message command incomplete
A message is issued before replying to Disc Manager.
F702
Message command changed
A message is issued before replying to Disc Manager.
F710
AD conversion at AN0 incomplete
Conversion cannot be complete within a designated
time during check of AD conversion before Y/C
automatic adjustment.
F711
AD conversion at AN1 incomplete
Conversion cannot be complete within a designated
time during check of AD conversion before Y/C
automatic adjustment.
F712
AD conversion at AN0 dispersed
Conversion
result
exceeds
standards
while
a
designated value is set during check of AD conversion
before Y/C automatic adjustment.
F713
AD conversion at AN1 dispersed
Conversion
result
exceeds
standards
while
a
designated value is set during check of AD conversion
before Y/C automatic adjustment.
F720
DA conversion at AN0 unchangeable
Conversion
result
exceeds
standards
while
a
designated value is set during check of AD conversion
before Y/C automatic adjustment.
F721
DA conversion at AN1 unchangeable
Conversion
result
exceeds
standards
while
a
designated value is set during check of AD conversion
before Y/C automatic adjustment.
F880
Unsuitable task number
When a message arrives from not existing task (error
stops)
F890
A message is sent during AV task transmission
During transmission of a message to AV task (error
stops)
F891
Unable to transmit a message to AV task
When a message starts transmission to AV task (error
stops)
F893
FLASH ROM altered
Content of FLASH ROM change
F894
EEPROM failure
EEPROM Promlem
F895
PERR JMP MI SMUCH
Firm device incompatible (non-conformant destination
value)
F896
PERR JMP NON
Firm device incompatible (non existing jumper)
F897
PERR NO INIT
Initialization incomplete
F8A0
Unsuitable message command
When a message starts transmission to AV task (error
stops)
10.2.3. CR16 Mechanism Ageing Mode
To enter into ageing mode :
1. Enter self-diagnostic mode. (Doctor Mode)
2. Press [3] button on remote control. It enters into ageing mode. (See below for ageing process)
Ageing process
1. Tray 1 open.
2. It waits for one second (Note : Do not put any disc into the tray)
3. Tray 1 close.
4. TOC READ (Reading incomplete)
5. Tray 2 open & repeat process 1 to 4. (Process repeat until Tray 5)
6. Tray check.
7. Whole process complete (Counter on FL increase by 1)
Display Example :
[ 0 0 0 0 0 T 3 O P ]
...TRAY OPEN
[ 0 0 0 0 0 T 3 C L ]
...TRAY CLOSE
[ 0 0 0 0 0 T 3 R E ]
...TOC READING
[ 0 0 0 0 0 T 3 C H ]
...TRAY CHANGING
Note : To exit ageing mode, press [POWER] button. The unit will power down. Do not unplug the power cord until FL display shows
“ BYE “. This is to avoid tray jam problem.
10.2.4. Clearing Of Error Code
1. Enter into self-diagnostic mode
2. Press & hold [STOP] for 5 secords or more.
20
SA-HT833VP
Содержание SA-HT833VP
