21
RQTC0047
Cha
nging the
pla
y
e
r s
e
tt
ings
∫
“Audio” tab
∫
“Display” tab
§
5
[Southeast\Asia]and]Singapore]
§
6
[Russia]and]United]Arab]Emirates]
∫
“Others” tab
(Effective when playing multi-channel audio)
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the speakers,
except for the subwoofer, should be the same distance from the
seating position. If you have to place the center or surround
speakers closer to the seating position, adjust the delay time to
make up for the difference.
1
Press [
3
,
4
,
2
,
1
] to select the delay time
box and press [ENTER].
2
Press [
3
,
4
] to adjust the delay time and
press [ENTER].
If either distance
a
or
b
is less
than
c
, find the difference in the
relevant table and change to the
recommended setting.
To finish the delay time setting
Press [
2
] and then [
3
,
4
] to select “Exit” and press [ENTER].
(Center and surround speakers only)
This is one of the ways to get appropriate surround effects. Adjust
the speaker level to the same level as the front speakers.
1
While stopped
Press [
3
,
4
,
2
,
1
] to select “Test” and
press [ENTER].
2
Press [
3
,
4
] to select the desired level for
each speaker while test signal is being
output.
≥
Center, Surround (L/R):
`
6 dB to +6 dB
For your reference
You can also adjust the speaker levels during play (
➜
page 27).
To finish the speaker level setting
Press [
∫
STOP] to select “Exit” and press [ENTER].
Dynamic Range Compression
≥
Off
≥
On:
Adjust for clarity even when the volume is low through compressing the range of the lowest
sound level and the highest sound level. Convenient for late night viewing. (Only works with
Dolby Digital)
Audio during Search
≥
On
≥
Off
Speaker Setting (
‹
below)
Set the delay time for your center and
surround speakers or adjust the
speaker levels.
Delay time
≥
Center: 0.0/1.0/2.0/3.0/4.0/5.0 ms
≥
Surround (L/R): 0.0/5.0/10.0/15.0 ms
Speaker level
≥
Center, Surround (L/R):
`
6 dB to + 6 dB
Menu Language
§
5
≥
English
≥
§
6
≥
English
≥
Français
≥
Deutsch
≥
Italiano
≥
Español
≥
Português
≥
Svenska
≥
Nederlands
On-Screen Messages
≥
On
≥
Off
FL Dimmer
≥
Bright
≥
Dim
≥
Auto:
The display is dimmed during play, but brightens when you perform some operations.
HighMAT
≥
Enable
≥
Disable (Unable to use the HighMAT function)
QUICK SETUP
≥
Yes
≥
No
Re-initialize Setting
This returns all values in the Setup
menus to the default settings.
≥
Yes: The password screen is shown if Ratings (
➜
page 20) are set. Please enter the same
password. After “INIT” on the display disappears, turn the unit off and on again.
≥
No
Speaker Setting
Changing the delay time
Exit
LS
SW
C
RS
ms
0.0
Test
ms
0.0
R
L
Center delay time
Surround delay time
Exit
a
Center speaker
Difference
Setting
Approx. 34 cm
1.0 ms
Approx. 68 cm
2.0 ms
Approx. 102 cm
3.0 ms
Approx. 136 cm
4.0 ms
Approx. 170 cm
5.0 ms
b
Surround speakers
Difference
Setting
Approx. 170 cm
5.0 ms
Approx. 340 cm
10.0 ms
Approx. 510 cm
15.0 ms
LS
RS
L
R
SW
b
c
a
C
: Recommended placement
Adjusting the speaker levels
Exit
LS
SW
C
RS
L
ms
0.0
dB
0
Test
ms
0.0
dB
0
dB
0
R
Surround (R)
Surround (L)
Exit
Test
Center
Test signal is output from each speaker in clockwise.
RQT0047.book 21 ページ ２００４年８月４日 水曜日 午後５時４８分
