44
Step 10 Detach 27P FFC at the connector (CN2009) on Main
P.C.B..
Step 11 Detach 17P FFC at the connector (CN2004) on Main
P.C.B..
Step 12 Remove Main P.C.B..
Caution: During assembling, ensure that earth plate is
bended flat against the Main P.C.B. properly when inserted
to locators.
9.13. Replacement of Voltage Regu-
lator IC (IC2010)
• Refer to “Disassembly of Main P.C.B.”.
9.13.1.
Disassembly of Voltage Regulator
IC (IC2010)
Step 1 Desolder pins of the Voltage Regulator IC (IC2010) on
the solder side of Main P.C.B..
Step 2 Remove 1 screw.
Step 3 Remove the Voltage Regulator IC (IC2010) from the
Main P.C.B..
Caution: Avoid touching the Heatsink due to its high tem-
perature after prolong use. Touching it may lead to inju-
ries.
Содержание SA-AKX92PH
