39
Step 5
Detach 27P FFC at the connector (CN2706) on Main
P.C.B..
Step 6
Detach 9P FFC at the connector (CN2010) on Main
P.C.B..
Step 7
Remove Main P.C.B..
Caution: During assembling, ensure that earth plate is
bended flat against the Main P.C.B. properly when inserted
to locators.
8.12. Replacement of Voltage Regu-
lator IC (IC2010)
•
Refer to “Disassembly of Main P.C.B.”.
8.12.1.
Disassembly of Voltage Regulator
IC (IC2010)
Step 1
Desolder pins of the Voltage Regulator IC (IC2010) on
the solder side of Main P.C.B..
Step 2
Remove 1 screw.
Step 3
Remove the Voltage Regulator IC (IC2010) from the
Main P.C.B..
Caution: Avoid touching the Heatsink due to its high tem-
perature after prolong use. Touching it may lead to inju-
ries.
Содержание SA-AKX12LM-K
