68
9.26. Disassembly of AC Inlet P.C.B.
• Follow (Step 1) to (Step 5) of Item 9.3
Step 1 :
Remove 1 screw.
Step 2 :
Release the tab at the Rear Panel as arrow show.
Step 3 :
Cut 2 tie wraps.
Caution : Remember to tie the red, black, blue wires with
the wraps to the bottom chassis as diagram show.
Step 4 :
Remove 2 screws on AC Inlet P.C.B..
Step 5 :
Lift up AC inlet P.C.B. from bottom chassis.
Caution: During assembling, ensure the AC Inlet P.C.B. is
seated properly at the locator, screw 2 screws at AC Inlet
P.C.B..
Step 6 :
Turn over AC Inlet P.C.B. to the solder side.
Step 7 :
Desolder black wire pin & red wire pin on AC Inlet
P.C.B..
Step 8 :
Remove the AC Inlet P.C.B..
Содержание SA-AK980
