6
Adjusting Airflow Direction
Using the wireless remote controller
Using the timer remote controller
Press
/
to select your desired airflow direction.
Flap swing motion
Display when swing operation
is stopped
z
Pressing the button during
swing operation can stop the
flap at the desired position.
Flap fixed
(5 levels)
Recommended vertical airflow direction
z
Set the flap to the downward position for heating operation.
(With the upward setting, warm air cannot reach the floor.)
z
Set the flap to the upward position for cooling operation.
(With the downward setting, condensation may drip on to the
floor.)
U1, T2 type
HEAT
COOL / DRY
FAN
Airflow direction
display
Airflow direction display
“FLAP” button
“FLAP” button
Fan and
heating
Cooling and
drying
(5 levels)
(3 levels)
Recommended
Recommended
Fixed to this
position
Adjusting the horizontal airflow direction
(Manual: T2 type only)
Move the
horizontal
airflow vanes
by hand for
adjustment.
This section is described in the instruction manual supplied with the timer remote contoller (CZ-RTC2).
Regarding the High-spec Wired Remote Controller (CZ-RTC3), refer to the Operating Instruction supplied with the model CZ-RTC3.
Adjusting the upward and downward motion of airflow direction (U1 and T2 types)
F569618_L.indb 6
2013-12-4 14:57:23
