18
1. GENERAL
This booklet briefly outlines where and how to install the air conditioning system. Please read
over the entire set of instructions for the indoor and outdoor units and make sure all accessory
parts listed are with the system before beginning.
The installation of pipe-work shall be kept to a minimum.
WARNING
This symbol shows that this equipment uses a flammable refrigerant. If the
refrigerant is leaked, together with an external ignition source, there is a
possibility of ignition.
CAUTION
This symbol shows that the Operating Instructions should be read carefully.
CAUTION
This symbol shows that a service personnel should be handling this
equipment with reference to the Technical Manual.
CAUTION
This symbol shows that there is information included in the Operating
Instructions and/or Installation Instructions.
1-1. Tools Required for Installation
(not supplied)
1. Flathead screwdriver
2. Phillips head screwdriver
3. Knife or wire stripper
4. Tape measure
5. Carpenter’s level
6. Sabre saw or keyhole saw
7. Hacksaw
8. Core bits
9. Hammer
10. Drill
11. Tube cutter
12. Tube flaring tool
13. Torque wrench
14. Adjustable wrench
15. Reamer (for deburring)
1-2. Accessories Supplied with Unit
Make sure all accessory parts listed are with
the system before beginning.
Type 15, 22, 28, 36
Part Name
Figure
Q’ty
Remarks
Installation plate
1
Screw (4×25)
5
For installation
plate installation
Operating
Instructions
1
Installation
Instructions
1
Type 45, 56, 73, 106
Part Name
Figure
Q’ty
Remarks
Installation
plate
1
Screw
(4×25)
5
For installation
plate installation
Flare
insulator
1
For flare nut
insulation
200 mm × 200 mm
Clamper
1
For fixing wires
Operating
Instructions
1
Installation
Instructions
1
01_330200_EU_Eng.indb 18
2021/1/13 10:22:57
