24
Type 45, 56, 73, 106
5
4
235
47.5
(243)
59
30
137.5
128
128
132.5
6
7
Ceiling
Liquid tube
Gas tube
ø80 Hole for right side tubing
ø80 Hole for left side tubing
Wall
Wall
More than
3
More than
2
More than
1
* Mount the installation plate with 5 screws completely.
Unit: mm
Type
Dimensions
1
2
3
4
5
6
7
45, 56, 73, 106
607.5
612
105
183.5 188.5
234
284
Make sure the installation plate is horizontal, using a carpenter’s level or tape measure to
measure down from the ceiling.
Wait until after cutting the hole before attaching the installation plate to the wall.
* The center of installation plate should be at more than
1
at right of the wall.
* The center of installation plate should be at more than
2
at left of the wall.
* The distance from installation plate edge to ceiling should be more than
3
.
<In case of Type15, 22, 28, 36>
* From installation plate center to unit’s left side is
4
.
* From installation plate center to unit’s right side is
5
.
* For left side tubing, tubing connection for liquid should be about
6
from
B
line.
* For left side tubing, tubing connection for gas should be about
7
from
B
line.
<In case of Type 45, 56, 73, 106>
* From installation plate left side to unit’s left side is
4
.
* From installation plate right side to unit’s right side is
5
.
* For left side tubing, tubing connection for liquid should be about
6
from
Y
line.
* For left side tubing, tubing connection for gas should be about
7
from
Y
line.
(2) Before making the hole, check carefully that no studs or pipes are directly run behind the
spot to be cut.
CAUTION
Avoid areas where electrical wiring is located.
The above precautions are also applicable if tubing goes through the wall in any other location.
01_330200_EU_Eng.indb 24
2021/1/13 10:22:58
