Using the timers
ª
To cancel the timer
In step
3
of the above two timer setting
procedures, select “OFF” and press
[SELECT, ENTER]. The indicator for the
timer (“
F
REC” or “
F
PLAY”) goes out.
ª
To check the timer settings
1
Press [MODE].
You can now select a mode.
2
1
Within 10 seconds
Push [SELECT, ENTER] up or down
to select “TIMER REC” or “TIMER
PLAY”.
2
Within 10 seconds
Press [SELECT, ENTER].
The timer settings are shown for about two
seconds.
≥
You can set the timer within twenty-four hours of
the present time.
≥
You cannot use the two timers at the same time.
The timer you set last will work.
≥
The timer settings are cleared if the batteries are
removed or if the time information is lost, or the
card is removed from the unit.
∫
Unit
≥
Avoid using or placing this unit near sources of
heat. Do not leave it in an automobile exposed
to direct sunlight for a long period of time with
the doors and windows closed.
≥
To avoid product damage, do not expose this
product to rain, water or other liquids.
≥
Do not keep this unit and magnetized cards
(bank cards, commuter passes, etc.) close
together.
≥
These speakers do not have magnetic shelding.
Do not place them near televisions, personal
computers or other devices easily influenced by
magnetism.
∫
Dry cell battery
≥
Align the poles (
+
and
-
) properly when
inserting the batteries.
≥
Do not mix old and new batteries or different
types of batteries.
≥
Do not recharge ordinary dry cell batteries.
≥
Remove the batteries if the unit is not to be used
for a long time.
≥
Do not use the batteries if the covering has been
peeled off.
Mishandling of batteries can cause electrolyte
leakage which can damage items the fluid
contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your
dealer. Wash thoroughly with water if electrolyte
comes in contact with any part of your body.
Do not attempt to remove the cover(s) or repair the unit
yourself. Refer servicing to qualified personnel only.
∫
Product information
For product service, product information or assistance
with product operation, refer to the servicenter directory.
∫
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth
dipped in a soap-and-water solution or a weak detergent
solution.
≥
Never use alcohol, paint thinner or benzine to clean
this unit.
≥
Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
32
33
RQT5626
RQT5626
Timer settings
Note
Care and use
Product service
Maintenance
References
