VQT4J81
20
20
Selecting the recording scene
This unit offers recommended recording settings for each recording scene. Selecting
the recording scene enables easy recording with the most appropriate settings.
• Press [STOP
g
/RETURN] to stop the unit.
1
Press [MENU] for
approx. 1 second
or more.
The screen to select
the recording scene is
displayed.
2
Press +, – to select the scene and
press [
q
OK] to enter.
If you select “USER”, skip the step
3
.
3
Press +, – to select “LOAD” and
press [
q
OK] to enter.
To exit the setting screen, press
[F2 (CLOSE)].
The selected recording
scene is displayed.
When [REC
*
] is pressed, recording is
performed with the selected recording scene
setting.
*
If you select “USER” in step
2
, the state immediately before the recording scene was set is
restored, and the recording scene indication disappears.
*
If you individually change settings such as the recording mode when the recording scene is set,
the settings overwrite the “USER” settings, and the recording scene indication disappears.
*
The recording scene operates when microphone recording is used. Recording scene does not
operate when another device is connected and the Mic/Line switch is set to [LINE] (
➜
page 35).
*
You can also set the recording scene by pressing [MENU] and selecting “SCENE SELECT” from
“MIC REC MENU”.
F2
REC
*
STOP
g
/RETURN
MENU
VQT4J81̲RR-XS450̲420-E̲En.indd 20
VQT4J81̲RR-XS450̲420-E̲En.indd 20
2012/05/29 9:35:43
2012/05/29 9:35:43