VQT3T14
7
7
ENGLISH
Inserting the battery/Charging
Upon purchasing, charge once before initial use.
Use your computer for charging. If the battery has
completely run out, it takes approx. 2 hours for a full
recharge.
Inserting the rechargeable battery (supplied)
5
2
3
4
1
1 AAA rechargeable Ni-MH battery
Make sure the battery faces the
right direction.
Charging the battery
• Start the computer beforehand.
• Turn the unit off beforehand. (
➜
page 9)
1
Take out the USB plug.
Push and slide
until a “click”
sound is heard.
Storing the USB plug:
2
Insert the unit’s USB plug into the computer.
Insert the USB plug
straight in the same
direction as that of
the terminal.
If the unit cannot be connected to the computer
directly, use the USB extension cable (supplied).
The
fi
rst time you connect the unit to your
PC
Because multiple “Found New Hardware” messages
will appear, do not disconnect the unit from your PC
until all messages disappear.
*
Never disconnect the unit or remove the SD card
while “ACCESS…” is displayed,
otherwise this
unit may be damaged.
3
Slide the OPR/HOLD switch to the [HOLD]
side.
ON / OFF
OPR HOLD
Status indicator
OPR/HOLD
switch
VQT3T14̲RR-XS410̲400-E̲En.indd 7
VQT3T14̲RR-XS410̲400-E̲En.indd 7
2011/06/22 15:00:26
2011/06/22 15:00:26