TQBM0094
6
6
■
Note
• There may be instances when hands free setting needs to be done on the
Bluetooth
®
enabled phone.
• Depending on the Bluetooth
®
enabled phone, you may hear incoming and
outgoing call ringtones of the phone from the unit.
• (
HFP
only) The calling device will be switched between the Bluetooth
®
enabled
phone and the unit. (Press the Call
on the unit twice quickly to switch.)
Useful functions
Resetting the unit
This unit can be reset when all operations are rejected. To reset the unit, press and
hold the power
button for 10 seconds or more. All the previous operations will
be canceled. (The pairing device information will not be deleted.)
Auto power off
If the unit is silent for approximately 5 minutes and operations for Bluetooth
®
devices are idle during that period, a beep will sound and the power will be
automatically turned off.
LED indicator light
When the battery level is low during use of the unit, the blue blinking LED will
change to red*. A beep will sound every 1 minute. When the battery runs out, the
power will turn off.
* If you press and hold the pairing button when the battery level is low, the LED
will blink only in red.
Restoring to the factory settings
When you want to delete all pairing device information, etc., you can restore the
unit to the factory settings (original settings upon purchase). Charge the battery
before restoring the unit.
1 Press and hold the power
button for approximately 5 seconds
• Start searching for Bluetooth
®
devices to connect.
2 Press and hold + and − for 6 seconds or more simultaneously while
searching
• The LED will blink fast in blue. The unit will restore to the factory settings.
■
Attention
• When pairing a device again, delete the registering information (Device:
“RP-HF400B”) from the Bluetooth
®
device’s menu, and register this unit with the
Bluetooth
®
device again. (→ P. 4)
Maintenance
Clean this unit with a dry and soft cloth.
• Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a
chemical wiper, etc. This might cause the exterior case to be deformed or the
coating to come off.
■
Folding this unit
Fold the headphones as shown below. Improper folding may result in a
malfunction.
Do
Do Not
●
The Bluetooth
®
word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is
under license.
Other trademarks and trade names are those of their respective owners.
●
Other system names and product names appearing in this document are in
general the registered trademarks or trademarks of the respective developer
companies.
Note that the ™ mark and
®
mark do not appear in this document.
Copyright, etc.
