CAUTION
Before turning on the fan, make sure the connector is inserted at the correct position. Failure to properly connect
will result in fan not working.
The claw of the connector must latch to the rib completely.
WARNING
The blower/motor assembly must be tightly installed into the
housing can with the 2 screws (ST4.2X8). Failure to do so will
affect the grounding.
WARNING
Disconnect power source before working on unit.
Blower/
motor
assembly
Adaptor
flanges
1
Install grille
Insert the grille assembly mounting springs into the slots as shown
and mount grille assembly to fan body.
1
Remove grille
Remove grill assembly, by squeezing the mounting springs and
pulling it down carefully.
1
Grille
assembly
Slot
Gloves
Mounting
spring
1
Grille
assembly
Mounting
spring
Slot
Gloves
Fan body
1
INSTALLATION INSTRUCTIONS (CONTINUED)
MAINTENANCE (CLEANING)
CAUTION
Routine maintenance must be done every year.
Never use gasoline, benzene, thinner or any other
such as chemicals for cleaning the ventilating fan.
Do not immerse motor in water when cleaning. Do
not soak resin parts in water over 140ºF (60ºC).
6
Claw
Rib
Plug connector
2 Screws (ST4.2X8)
2
