Panasonic PVDM2092 - MONITOR/DVD COMBO, Руководство по обслуживанию

Страница: 31 / 309

2. Removal of Color Picture Tube Unit
Place the Unit face down on a soft cloth before removing the
Color Picture Tube Unit.
3. Installation of VCR Chassis Unit
When installing 2 Screws (460), slide the Holder Unit of the
Cassette Up Ass'y (Refer to "
WHEN LOADING WITHOUT A
CASSETTE " in SERVICE NOTES) to tighten screws. Then, slide it
back to the EJECT Position.
Make sure that Mechanism and Cassette Up Ass'y are in the
EJECT Position. (Refer to "
EJECT Position Confirmation " in
Disassembly/Assembly Procedures.)
4. Removal of Main C. B. A.
Work carefully so as not to break Sensor LED when lifting the
Mechanism Chassis and Cassette Up Ass'y.
Installation of Mechanism Chassis and Cassette Up Ass’y onto
Main C.B.A.
A. Make sure the Mode Select SW. on the Main C.B.A. is in EJECT
position. If not, rotate the Mode Select SW. until the alignment
projection is in the EJECT Position.
B. Make sure the Mechanism and Cassette Up Ass’y are in the
EJECT Position. (Refer to " EJECT Position Confirmation " in
DISASSEMBLY/ASSEMBLY PROCEDURES.)
Fig. D6
C. Install the Mechanism Chassis and Cassette Up Ass’y straight
onto the Main C.B.A. so that the Sensor LED clears the hole in
the Mechanism Chassis and that 3 Connectors (P6201, P3001
and P4001) are aligned and seated securely.
5. Installation of Cassette Up Ass'y
A. Confirm that the Locking Tab under the Cassette Up Ass'y is in
31