Panasonic PVDM2092 - MONITOR/DVD COMBO, Руководство по обслуживанию

Страница: 14 / 309

7. Connect the AC Plug and turn on the power. Then, reset all VCR
memory. Refer to " HOW TO RESET ALL COMBINATION DVD VCR
MEMORY FUNCTIONS ."
5.1.3.2. How to update the firmware of DVD Decoder:
1. Confirm the firmware version of DVD Decoder. Refer to " SELF-
DIAGNOSTIC TEST FUNCTION FOR DVD ."
2. Set the unit to DVD mode.
3. Press OPEN/CLOSE button to open the tray. Then, place the
Firmware Disc for DVD Decoder in the tray.
4. Close the tray. Updating will begin automatically.
5. After approx. 1 minute, the tray will open automatically.
Note:
If the tray has still not opened after 3 minutes or Error Indication
appears, updating was unsuccessful. In this case, repeat above
steps from step 1.
6. Remove the Firmware Disc from the tray. Then, disconnect the AC
Plug. (The tray will not close.)
7. Connect the AC Plug and turn on the power. Then, reset all VCR
memory. Refer to " HOW TO RESET ALL COMBINATION DVD VCR
MEMORY FUNCTIONS ."
CAUTION:
1. Do not unplug the AC Cord during updating.
2. Do not press any buttons during updating.
5.1.4. USAGE SCREEN MODE
Function displayed on the TV monitor:
- the total elapsed "Power on" time (in days)
- the total elapsed "Cylinder rotation" time (in hours)
- the total elapsed "DVD play" time (in hours).
1. With power turned and no cassette, press STOP/EJECT button on
VCR and 7 key on remote together.
The USAGE SCREEN will be displayed on the TV Monitor.
Fig. 3
14