Panasonic PVD734S - DVD/VCR DECK, Руководство по обслуживанию

Страница: 27 / 131

2. Supply the solder from the upper position of IC leads sliding to the
lower position of the IC leads. (Refer to Fig. 3-6 .)
Fig. 3-6
3. Absorb the solder left on the lead using the Braided Shield Wire.
(Refer to Fig. 3-7 .)
NOTE
Do not absorb the solder to excess.
Fig. 3-7
4. When bridge-soldering between terminals and/or the soldering
amount are not enough, resolder using a Thin-tip Soldering Iron.
(Refer to
Fig. 3-8 .)
Fig. 3-8
27