Panasonic PV-GS19P, Руководство по обслуживанию

Страница: 7 / 115

6.1.2. SERVICE MODE
6.1.2.1. ERROR DISPLAY
"PUSH THE RESET SWITCH" is displayed automatically on the EVF or the LCD Monitor when an undesirable condition has
occurred.
Fig. 2
Note:
When "PUSH THE RESET SWITCH" is displayed repeatedly, service is required. Check the Error Code which is listed in the
Service Menu.
6.1.2.2. SERVICE MENU
When abnormal detection contents are confirmed, do the following operation. Automatic diagnosis cord will be displayed.
(Service menu)
To enter the Service Menu
Push the [QUICK START], [JOYSTICK CONTROL LEFT] and [PHOTO SHOT] simultaneously for 3 seconds (with no SD Card
inserted).
Note:
If a tape or SD Card is inserted, the above operation will not work.
This operation displays the following Service Menu items.
· *1 ... Cylinder elapsed time clear.
After replacing the Cylinder Unit, clear the Cylinder elapsed time to 0.
Set to Service Menu.
Press the [JOYSTICK CONTROL UP/DOWN] to select item [8].
Press the [JOYSTICK CONTROL RIGHT] to display [NO/YES] screen.
Press the [JOYSTICK CONTROL UP/DOWN] to select [YES].
Press the [JOYSTICK CONTROL CENTER] button.
· *2 ... Cylinder elapsed time
This item displays the Cylinder elapsed time (in Base 16).
Set to Service Menu.
Press the [JOYSTICK CONTROL UP/DOWN] to select item [3].
Press the [JOYSTICK CONTROL RIGHT] to display [OFF/ON] screen.
Press the [JOYSTICK CONTROL UP/DOWN] to select [ON].
Press the [JOYSTICK CONTROL CENTER] button.
10
PV-GS19P / PV-GS31P / PV-GS32P / PV-GS35P / PV-GS19PC / PV-GS31PC / PV-GS34PC / PV-GS35PC