Panasonic PV-DV102PN, Руководство по обслуживанию

Страница: 82 / 337

the discontinuation of this item in production, it will no longer be
available.
3. Cut Washers (Ref. No. 473, 475, and 477) are not reusable. If
removed, install a new one.
4. Lamp (Ref. No. 283) replacement note: / DANGER: Use only
replacement Lamp (PART NO. LSLL0028) supplied by Panasonic
to reduce risk of fire. Handle new Lamp with cloth or tissue as skin
oils decrease Lamp life. Remove Light Protector and allow Lamp
to cool before replacing to avoid possible burn hazard.
5. DEW Sensor (Ref. No. 236) and DEW Cables (Ref. No. 286)
replacement note:
The DEW Sensor (Ref. No. 236) or DEW Cables (Ref. No. 286) is
supplied separately as replacement parts. When replacing the
DEW Sensor in early products, be sure to replace both the DEW
Sensor and the DEW Cables. Refer to "
DEW Sensor, DEW Cable "
of MECHANISM SECTION in DISASSEMBLY/ASSEMBLY
PROCEDURES.
6. Mechanism Chassis Ass'y (Ref. No. 1) replacement note:
When replacing the Mechanism Chassis Ass'y, be sure to perform
the Envelope Output Adjustment. Refer to "ENVELOPE OUTPUT
ADJUSTMENT" in MECHANICAL ADJUSTMENT.
7. Front Case Unit (Ref. No. 301) replacement note:
When replacing the Front Case Unit (Ref. No. 301), be sure to
remove the Lens Cushion (Ref. No. 7) if it is found on the Lens
Ass'y.
11.1.3. Electrical Replacement Notes
1. Unless otherwise specified;
All resistors are in , K = 1,000 , M = 1,000 k .
2. Abbreviation
RTL: Retention Time Limited
This indicates that the retention time is limited for this item. After
the discontinuation of this item in production, it will no longer be
available.
NR: Non Repairable Board Ass'y
82