41
• “ON” is set ..... When a DVD is played back, the average volume is increased.
• “OFF” is set .... The volume level recorded on the disc is played back just as it is.
Setting the VOLUME ADJUST
Press
VOL.ADJ
repeatedly to change “ON”
↔
↔
↔
↔
↔
“OFF.”
• “ON” or “OFF” lights up on Multi Function Display (about 3 seconds) when
press VOL.ADJ.
Some DVD
[Volume level is low]
VOLUME ADJUST “OFF”
Volume is the original level.
VOLUME ADJUST “ON”
Volume level is increased
when played back.
Some DVDs are recorded in lower than average volume levels.
For these DVDs, this DECK can be set so that the average volume
is increased.
*Important: if a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
DV
D
Operation
• This feature is available only for Dolby Digital sound tracks.
• When audio equipment is connected, setting the Sound Output level to “OFF” is recommended.
• If the sound becomes abnormal while playing a disc, set the Sound Output level to “OFF.”
Notes
PV-D4733S-K(E) P36-56 (030314).p65
2003/04/09, 13:52
41