S
P
E
C
F
I
L
E
PT-
DS8500
U
3-Chip DLP
®
Projector
As of July 2010
SFD10M002
3 / 1 7
Terminals *
3
SDI IN
HDMI IN
DVI-D IN
RGB 1 IN
RGB
YP
B
P
R
(YC
B
C
R)
RGB 2 IN
R, G, B
YP
B
P
R
(YC
B
C
R)
VIDEO IN
S-VIDEO IN
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
LAN
Power cord length
Cabinet materials
Dimensions (W × H × D):
Weight
Operating temperature
Operating humidity
BNC × 1,
SD-SDI signal (YC
B
C
R
4:2:2 10-bit):
SMPTE 259M compliant: 480i, 576i
Single-link HD-SDI signal (YC
B
C
R
4:2:2 10-bit):
SMPTE 292M compliant: 720/50p, 720/60p, 1035/60i, 1080/50i,
1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
HDMI 19-pin × 1, Deep Color, compatible with HDCP,
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p
(non-interlaced signals only),
VGA (640 × 480) – WUXGA*
2
(1,920 × 1,200),
dot clock: 25–162 MHz
NOTE: Compatible with non-interlaced signals only.
DVI-D 24-pin × 1, DVI 1.0 compliant, HDCP compatible,
for single link only
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 × 480) – WUXGA*
2
(1,920 × 1,200),
dot clock: 25 –162 MHz
NOTE: Compatible with non-interlaced signals only.
BNC × 5
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: High impedance, TTL (positive/negative), 75 ohms
Y: 1.0 Vp-p (including sync signal), P
B
/P
R
(C
B
/C
R
): 0.7 Vp-p, 75 ohms
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
D-sub HD 15-pin (female) × 1
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: High impedance, TTL (positive/negative), 75 ohms
Y: 1.0 Vp-p (including sync signal), P
B
/P
R
(C
B
/C
R
): 0.7 Vp-p, 75 ohms
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
BNC × 1, 1.0 Vp-p, 75 ohms
Mini DIN 4-pin × 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
D-sub 9-pin × 1 (RS-232C compliant) for external controller
D-sub 9-pin × 1 for link control
M3 jack × 1 for wired remote control
M3 jack × 1 for link control
D-sub 9-pin × 1 for external control (parallel)
RJ-45 × 1 for network connection, 100Base-TX/10Base-T, compliant
with PJLink™ (class 1)
3.0 m (9
ft
10 in)
Molded plastic
530 mm × 200 mm*
5
× 548.5 mm*
6
(20-7/8˝ × 7-7/8˝ *
5
× 21-19/32˝ *
6
) (without lens)
Approx. 24 kg (52.9 lbs)*
7
(without lens)
0°–45°C (32°–113°F)*
8
10%– 80% (no condensation)
