S
P
E
C
F
I
L
E
PT-
DS8500
U
3-Chip DLP
®
Projector
As of July 2010
SFD10M002
2 / 1 7
Specifications
Main unit
Power supply
Power consumption
DLP
®
chip
Panel size
Display method
Pixels
Lens
Lamp
Screen size
Brightness*
2
Center-to-corner uniformity*
2
Contrast*
2
Resolution
Scanning frequency
SDI
HDMI/DVI-D/RGB
YP
B
P
R
(YC
B
C
R
)
S-Video/Video
Optical axis shift
Keystone correction range
Installation
120 V AC, 10 A, 60 Hz
920 W (970 VA) (0.2 W with standby mode set to ECO*
1
. 6 W with
standby mode set to NORMAL. Both with fan stopped.)
24.1 mm (0.95 inches) diagonal (4:3 aspect ratio)
DLP
®
chip × 3 (R, G, B), DLP
®
projection system
1,470,000 (1,400 × 1,050) × 3, total of 4,410,000 pixels
Optional powered zoom/focus lenses
355 W UHM lamps (× 2) (dual lamp system)
70 – 600 inches (70 – 300 inches with the ET-D75LE5), 4:3 aspect ratio
10,600 lumens (dual lamp, high mode)
90%
10,000:1 (full on/full off, in dynamic iris 3 mode)
1,400 × 1,050 pixels (Input signals that exceed this resolution will be
converted to .)
SD-SDI signal: SMPTE 259M compliant: 480i, 576i
Single-link HD-SDI signal: SMPTE 292M compliant:
720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p,
1080/24p, 1080/24sF, 1080/30p
Horizontal: 15 –100 kHz, vertical: 24 – 120 Hz,
Dot clock: 162 MHz or lower
525i (480i): f
H
15.75 kHz; f
V
60 Hz,
625i (576i): f
H
15.63 kHz; f
V
50 Hz,
525p (480p): f
H
31.50 kHz; f
V
60 Hz,
625p (576p): f
H
31.25 kHz; f
V
50 Hz,
750 (720)/60p: f
H
45.00 kHz; f
V
60 Hz,
750 (720)/50p: f
H
37.50 kHz; f
V
50 Hz,
1035/60i: f
H
33.75 kHz; f
V
60 Hz,
1125 (1080)/60i: f
H
33.75 kHz; f
V
60 Hz,
1125 (1080)/50i: f
H
28.13 kHz; f
V
50 Hz,
1080/25p: f
H
28.13 kHz; f
V
25 Hz,
1080/24p: f
H
27.00 kHz; f
V
24 Hz
1080/24sF: f
H
27.00 kHz; f
V
48 Hz,
1080/30p: f
H
33.75 kHz; f
V
30 Hz
1080/60p: f
H
67.50 kHz; f
V
60 Hz,
1080/50p: f
H
56.25 kHz; f
V
50 Hz
Horizontal: 15.75/15.63 kHz, vertical: 50/60 Hz,
(NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)
±50% (±40% with the ET-D75LE6) from center of screen, powered
±30% (±20% with the ET-D75LE6) from center of screen, powered
Vertical: ±40° (±22° with the ET-D75LE5, ±28° with the ET-D75LE6)
When using only the KEYSTONE correction of the Geometric
Adjustment function: Vertical ±40°, horizontal ±15°
(vertical ±22° and horizontal ±15° with the ET-D75LE5,
vertical ±28° and horizontal ±10° with the ET-D75LE5)
When using both the KEYSTONE and CURVED corrections of the
Geometric Adjustment function: Vertical ±5°, horizontal ±5°
(vertical ±10° and horizontal ±10° with the ET-D75LE3,
vertical ±10° and horizontal ±15° with the ET-D75LE4/D75LE8)
Ceiling/floor, front/rear
