Panasonic PT-VX605N, Руководство по эксплуатации

Страница: 74 / 150

[P-TIMER]
Set and operate the presentation timer function.
Setting the mode
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The [P-TIMER] screen is displayed.
3) Press
as
to select [MODE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[COUNT UP] Displays the elapsed time since the count was started.
[COUNT DOWN] Displays the remaining time of the time set by [TIMER].
Setting the countdown timer
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The [P-TIMER] screen is displayed.
3) Press
as
to select [TIMER].
4) Press
qw
to set the time.
f
The time can be set in 1-minute increments from 1 to 180 minutes.
f
The factory default value is 10 minutes.
Note
f
[TIMER] is enabled when [MODE] is set to [COUNT DOWN].
Using the presentation timer
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The [P-TIMER] screen is displayed.
3) Press
as
to select the item, and press the <ENTER> button.
[START] The count is started.
[STOP]
The count is stopped.
[RESTART]
The count is resumed.
[RESET] The count is reset.
f
When [START] or [RESTART] is selected, the elapsed time or the remaining time is displayed at the bottom right of the
projected image.
f
When [STOP] is selected, the elapsed time or the remaining time when the count was stopped is displayed at the
bottom right of the projected image.
f
When [RESET] is selected, proceed to Step 4).
4) Press the <MENU> button three times, then menu screen will disappear.
f
The start time is displayed at the bottom right of the projected image.
Note
f
Presentation timer operations are also possible by the <P-TIMER> button on the remote control. (
Æ
page 50)
f
The security message set in the [SECURITY] menu → [TEXT DISPLAY] (
Æ
page 86) is not displayed when the elapsed
time or remaining time is displayed.
f
The elapsed time or remaining time is not displayed when the menu screen is displayed.
f
The start time becomes "000:00" when [MODE] is set to [COUNT UP].
f
When [MODE] is set to [COUNT DOWN], the start time becomes the value set at [TIMER].
f
The time gauge turns clockwise when [COUNT UP] is set, and turns counterclockwise when [COUNT DOWN] is set.
76 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu