Panasonic PT-VX605N Скачать руководство пользователя страница 102

Страница: 102 / 150

Error information page

When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to

display the error/warning details.

The projector may go into the standby status to protect the projector depending on the contents of the error.

1 Self-diagnosis result display

Displays the item check results.

[OK]:

Indicates that operation is normal.

[FAILED]:

Indicates that there is a problem.

[WARNING]:

Indicates that there is a warning.

[FAILED] items displayed when a problem occurs

Parameter

Description

[FAN]

Trouble has occurred in the fan or its drive circuit. Consult your dealer.

[FAN(INTAKE1)]

Trouble has occurred in the intake fan 1.

[FAN(INTAKE2)]

Trouble has occurred in the intake fan 2.

[FAN(INTAKE3)]

Trouble has occurred in the intake fan 3.

[FAN(INTAKE4)]

Trouble has occurred in the intake fan 4.

[FAN(EXHAUST)]

Trouble has occurred in the exhaust fan.

[FAN(LAMP)]

Trouble has occurred in the lamp cooling fan.

[INTAKE AIR TEMPERATURE]

The air intake temperature is too high. The projector may be used in an operating

environment where the temperature is high, such as near a heating appliance.

[EXHAUST AIR TEMPERATURE]

The exhaust air temperature is high. The air exhaust port may be blocked.

[LAMP REMAIN TIME]

The lamp runtime has exceeded the prescribed cumulative time, and it is now

time to replace the lamp.

[LAMP STATUS]

The lamp has failed to light.

Wait a short while for the lamp to cool off, and then turn on the power.

[APERTURE (CONTRAST-SHUTTER)] Trouble has occurred in the contrast shutter circuitry. Consult your dealer.

[AIR FILTER]

There is too much dust accumulated in the air filter unit. Turn off the projector and

unplug the power plug from the wall outlet, then replace the air filter unit.

[Network status] page

Click [Status] → [Network status].

The current network setting status is displayed.

104 -

ENGLISH

Chapter 4 Settings - [NETWORK/USB] menu

Содержание PT-VX605N























































































































































Результаты поиска

Содержание PT-VX605N

Отзывы:

Бренды по названию

Популярные бренды

Panasonic PT-VX605N, Руководство по эксплуатации

Результаты поиска

Содержание PT-VX605N

Отзывы:

Бренды по названию

Популярные бренды