Panasonic PT-VX431K, Руководство по эксплуатации

Страница: 77 / 132

1) Press
as
to select [FILTER COUNTER].
2) Press the <ENTER> button.
f
The [FILTER COUNTER] screen is displayed.
[FILTER COUNTER] Displays the usage time of the filter.
[TIMER] Sets the replacement cycle of the air filter.
[FILTER COUNTER
RESET]
Resets the air filter usage time.
Setting [TIMER]
If you want to regularly replace the air filter, set its cycle time. When the air filter usage time reaches the set time,
a message of “FILTER COUNTER has reached the set time” prompting you to replace the air filter is displayed on
the projection screen.
1) Press
as
to select [FILTER COUNTER].
2) Press the <ENTER> button.
f
The [FILTER COUNTER] screen is displayed.
3) Press
as
to select [TIMER].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[1000 H] ~ [7000 H]
Select to display the message. You can set the replacement cycle of the air filter in increments of 1000
hours..
[OFF] Select not to display the message.
Setting [FILTER COUNTER RESET]
Resets the usage time of the air filter.
1) Press
as
to select [FILTER COUNTER].
2) Press the <ENTER> button.
f
The [FILTER COUNTER] screen is displayed.
3) Press
as
to select [FILTER COUNTER RESET].
4) Press the <ENTER> button.
5) When the confirmation screen is displayed, press
qw
to select [OK] and then press the <ENTER>
button.
f
The display of [FILTER COUNTER] changes to “0H”.
[INITIALIZE ALL]
Return various setting values to their factory default settings.
1) Press
as
to select [INITIALIZE ALL].
2) Press the <ENTER> button.
f
The [INITIALIZE ALL] screen is displayed.
3) When the confirmation is displayed, press
qw
to select [OK] and then press the <ENTER> button.
f
The
[NOW INITIALIZING...]
screen is displayed and then the
[POWER OFF.]
screen will be displayed.
4) Press the <ENTER> button.
f
The operation of other buttons is disabled.
f
The initial setting (display language) screen will be displayed when turning on the projector next time.
Note
f
The projector will enter into the standby status to reflect the setting values when [INITIALIZE ALL] is executed.
f
When [INITIALIZE ALL] is executed, [STANDBY MODE], [EMULATE], [FILTER COUNTER] and the setting values of [NETWORK/USB]
cannot be returned to the factory default values. For details about the initialization of [NETWORK/USB], please refer to [NETWORK/USB] →
[INITIALIZE] (
x
page 84).
ENGLISH - 77
Chapter 4 Settings - [PROJECTOR SETUP] menu