Maintenance/replacement
Before performing maintenance/replacement
f
When you perform maintenance or replacement of the parts, make sure to turn off the power and disconnect the
power plug from the wall outlet. (
Æ
pages 34)
f
Be sure to observe the procedure “Powering off the projector” (
x
page 38) when performing power supply
operation.
Maintenance
Outer Case
Wipe off dirt and dust using a soft dry cloth.
f
If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry off the projector with
a dry cloth.
f
Do not use benzene, thinner or rubbing alcohol, other solvents or household cleaners. Using them may cause
deterioration of the outer case.
f
When using chemical treated dusters, follow its instruction.
Front glass surface of the lens
Wipe off the dirt and dust off the front surface of the lens with soft clean cloth.
f
Do not use a cloth that has an abrasive surface or a cloth that is moist, oily or covered with dust.
f
Do not use excessive force when wiping the lens as it is easily scratched.
f
Do not use benzene, thinner or rubbing alcohol, other solvents or household cleaners. Using them may cause
deterioration of the lens.
Attention
f
The lens may be damaged if you hit with a hard object or wipe with excessive force. Please handle with care.
DO NOT WIPE THE LENS DURING OPERATION.
Cleaning the lens during operation may cause foreign objects adhering to the
lens or bring damage to the lens surface.
Replacing the unit
Air filter unit
The air filter prevents dust from accumulating on the optical elements inside the projector. Should the air filter
become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat
buildup and adversely affect the life of the projector.
Also, if the internal temperature of the unit becomes high, the power of the projector may be turned off to protect
internal components.
If a warning message appears on the screen, replace the air filter immediately.
Consult your dealer to purchase a replacement air filter unit (ET-RFV300).
Removing the air filter unit
Fig.1
Fig.2
Air filter cover
Air filter unit
Tab
1) Remove the air filter cover. (Fig.1)
f
Open the air filter cover in the direction of the arrow and remove it.
112 -
ENGLISH
Chapter 6 Maintenance - Maintenance/replacement
Содержание PT-VX431K
Страница 33: ...Chapter 3 Basic Operations This chapter describes basic operations to start with ENGLISH 33...
Страница 85: ...Chapter 5 Operation of Function This chapter describes the operation methods of some functions ENGLISH 85...
Страница 117: ...Chapter 7 Appendix This chapter describes specifications and after sales service for the projector ENGLISH 117...