Panasonic PT-VW360D, Руководство по эксплуатации

Страница: 88 / 133

Displaying the Memory Viewer screen
1) Press the <MEMORY VIEWER/USB DISPLAY/NETWORK> button on the remote control or switch the
input source to MEMORY VIEWER .
f
Press the <INPUT SELECT> button on the control panel and select the input source in the input guide.
2) Attach the USB memory firmly into the <USB A (VIEWER/WIRELESS)> terminal.
f
The standby screen “please press ENTER” is displayed while the USB memory icon is displayed at the
lower left of the screen.
f
When the partition are separated in USB memory, several USB icons will be displayed.
3) Press the <ENTER> button on the remote control.
f
The root directory of the USB memory will be displayed in thumbnail on the screen.
Playing the pictures
1) Press
asqw
on the remote control to select a file you want to play on the memory viewer screen.
2) Press the <ENTER> button on the remote control.
f
The picture will display on the full screen.
3) Press
w
to switch to the next picture, press
q
to return to the previous picture.
4) Press the <ENTER> button on the remote control.
f
Return to the thumbnail screen.
Note
f
When the recorded number of pixels is smaller than the maximum number of display dot
*1
, it will be displayed enlarged maintaining the
aspect ratio.
f
When the recorded number of pixels is larger than the maximum number of display dot
*1
, it will be displayed reduced maintaining the aspect
ratio.
f
When the recorded number of pixels is the same as the maximum number of display dot
*1
, it will neither be enlarged nor reduced, so
degradation of image quality can be reduced.
*1 The maximum number of display dot for each product is as follows.
PT-VW360D and PT-VW360T: 1 280 x 800
PT-VX430D and PT-VX430T: 1 024 x 768
Executing the slide
All the still images in the same folder will be played continuously according to the setting of [NETWORK/USB]
menu → [MEMORY VIEWER LIGHT].
1) Press
asqw
on the remote control to select a file.
2) Press the <MENU> button to select the [MEMORY VIEWER LIGHT] → [SET SLIDE].
3) Press the <ENTER> button on the remote control.
f
The slideshow will start.
f
Press the <ENTER> button to return to the thumbnail screen.
Note
f
If you press the <MENU> button during playback in the slideshow, the playback will stop and a menu displays. The playing will continue
when the menu disappears.
Termination of the Memory Viewer
1) Press
asqw
to select the thumbnail which is displayed on the upper left corner.
2) Press the <ENTER> button on the remote control.
f
Return to the standby screen “please press ENTER”.
Note
f
You can also exit the Memory Viewer by switching to the input other than MEMORY VIEWER.
88 - ENGLISH
Chapter 5 Operation of Function - Memory Viewer function