Panasonic PT-VMZ51, Руководство по эксплуатации

Страница: 72 / 170

[DIGITAL CINEMA REALITY]
When inputting the following signals, it performs cinema processing to improve the vertical resolution and the
image quality.
480/60i, 576/50i, 1080/60i, 1080/50i signals
1) Press
as
to select [DIGITAL CINEMA REALITY].
2) Press
qw
or the <ENTER> button.
f
The [DIGITAL CINEMA REALITY] individual adjustment screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Performs no cinema processing.
[ON] Performs cinema processing.
[DYNAMIC CONTRAST]
Light adjustment of the light source and signal compensation are performed automatically according to the image
to make the contrast optimum for the image.
1) Press
as
to select [DYNAMIC CONTRAST].
2) Press
qw
or the <ENTER> button.
f
The [DYNAMIC CONTRAST] individual adjustment screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Disables the dynamic contrast function.
[1] Adjusts the light source and compensates signals to a small extent.
[2] Adjusts the light source and compensates signals to a large extent.
[USER]
The light source can be set to turn off when the brightness level of the input image signal falls below a
certain value.
Refer to “Setting the light off condition of the light source” (
x
page 72) for details.
Note
f
[DYNAMIC CONTRAST] can be adjusted only when there is a signal input. Its settings are effective only when no on-screen display such as
menu screen (OSD) or input guide, a test pattern, or a warning message is displayed.
Setting the light off condition of the light source
1) Press
as
to select [DYNAMIC CONTRAST].
2) Press
qw
or the <ENTER> button.
f
The [DYNAMIC CONTRAST] individual adjustment screen is displayed.
3) Press
qw
to select [USER].
4) Press the <ENTER> button.
f
The [DYNAMIC CONTRAST] screen is displayed.
5) Press
as
to select the item to set.
f
The items in the detailed setting will switch each time you press
qw
.
Setting item Details
[LIGHTS OUT TIMER]
(Setting of the waiting time
before turning off the light)
[DISABLE] Does not turn off the light source.
[0.5s] ~ [10.0s]
Turns off the light source when the brightness level of the image signal
being input goes under the value set in [LIGHTS OUT SIGNAL LEVEL].
Select an item from [0.5s] - [4.0s], [5.0s], [7.0s], or [10.0s].
[0.5s] - [4.0s] can be selected in increments of 0.5.
[LIGHTS OUT SIGNAL LEVEL]
(Setting of the brightness level
of the signal to turn off the
light)
[0%] ~ [5%]
Sets the level of the brightness of the image signal to turn off the light
source with [LIGHTS OUT TIMER].
Can be set in increments of 1%. (Factory setting: 0%)
72 - ENGLISH
Chapter 4 Settings - [PICTURE] menu