Panasonic PT-TX440, Руководство по эксплуатации

Страница: 80 / 138

80 - ENGLISH
f
The items will switch each time you press the button.
[OFF]
Disables the text display.
[ON]
Enables the text display.
[TEXT CHANGE]
Register or change the displayed text when [TEXT DISPLAY] is set to [ON].
1) Press
as
to select [TEXT CHANGE].
2) Press the <ENTER> button.
f
The [TEXT CHANGE] screen is displayed.
3) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
4) Press
asqw
to select [OK], and press the <ENTER> button.
f
The text is changed.
f
Up to 22 characters can be entered.
[MENU LOCK]
Display the menu by the <MENU> button and set whether or not to enable menu operations.
1) Press
as
to select [MENU LOCK].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Enables menu operations.
[ON]
Disables menu operations.
Note
f
When the entered password is incorrect after setting [MENU LOCK] to [ON], the <MENU> button cannot be operated.
f
The factory default setting or the setting after executing the [PROJECTOR SETUP] menu → [INITIALIZE ALL] is set to [OFF]. Set it to [ON]
if necessary.
f
When [MENU LOCK] is set to [ON], the [MENU LOCK PASSWORD] screen is displayed after pressing the <MENU> button. After entering
the set menu lock password, the menu operation is enabled. In this case, the menu operation will remain enabled until the projector enters
into standby mode.
[MENU LOCK PASSWORD]
Change the menu lock password.
1) Press
as
to select [MENU LOCK PASSWORD].
2) Press the <ENTER> button.
f
The [MENU LOCK PASSWORD] screen is displayed.
3) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
f
Up to 16 characters can be input.
4) Press
asqw
to select [OK], and press the <ENTER> button.
f
To cancel, select [CANCEL].
Attention
f
The initial password is “AAAA” at the time of purchase or when the [PROJECTOR SETUP] menu → [INITIALIZE ALL] is executed.
f
Change the password periodically that is hard to guess.
f
To initialize your password, consult your dealer.
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
1) Press
as
to select [CONTROL DEVICE SETUP].
Chapter 4 Settings - [SECURITY] menu