Panasonic PT-TX340, Руководство по эксплуатации

Страница: 41 / 112

ENGLISH - 41
Note
f
For more details, refer to the [Display] menu → [Aspect] (
x
page 51).
Using the screen adjustment function
You can correct the trapezoidal distortion and the curved distortion of the projected image.
button
1) Press the <KEYSTONE> button on the remote control.
f
The selection screen of screen adjustment function is displayed.
f
You can also press the <KEYSTONE> button on the control panel.
[H/V Keystone] Select when the trapezoid of the projected image is distorted.
[Corner correction] Select when the four corners of the projected image are distorted.
[Curved correction] Select when the linearity is not uniform or the projected image is curved distortion.
[Reset value] Return all adjusted values of the screen adjustment function to the factory default values.
2) Press
as
to select [H/V Keystone], [Corner correction], or [Curved correction].
3) Press the <ENTER> button.
f
The individual adjustment screen of the selected item is displayed.
4) Press
asqw
to adjust.
Note
f
For more details, refer to the [Expand] menu → [Keystone] (
x
page 61).
f
Press the <KEYSTONE> button on the control panel or on the remote control when the [H/V Keystone] , [Corner
correction] or [Curved correction] individual adjustment screen is displaying, the individual adjustment screen will switch
as follows.
- [H/V Keystone]

[Corner correction] (Upper left)

[Corner correction] (Upper right)

[Corner correction] (Lower right)

[Corner correction] (Lower left)

[Curved correction X/Y Gain]

[Curved correction X Offset]

[Curved correction Y
Offset]

[H/V Keystone]

...
Using the status function
Dsplay the status of the projector.
INFO .
button
1) Press the <INFO.> button on the remote control.
f
The [Info.] screen is displayed.
2) Press the <INFO.> button again.
f
The [Info.] screen disappears.
Note
f
For more details, refer to the [Info.] menu (
x
page 74).
Chapter 3 Basic Operations - Basic operations by using the remote control