Panasonic PT-RZ870LBEJ Скачать руководство пользователя страница 57

Страница: 57 / 212

Chapter 3

Basic Operations — Switching on/off the projector

ENGLISH - 57

For other countries or regions

Confirm that the <MAIN POWER> switch on the side of the projector is on the <OFF> side, and

remove the power plug from the outlet.

2) Remove the power cord connector from the <AC IN> terminal of the projector while pressing the side

tabs.

Attention

Do not remove the connector while the ends of the side tabs of the connector are hooked in the tabs of the <AC IN> terminal. If the

connector is removed while the tabs are hooked, the ends of the tabs may become damaged. Please stop using the projector if the tabs are

broken, and consult your dealer.

Power indicator

Indicate the status of the power. Check the status of the power indicator <ON (G)/STANDBY (R)> before operating

the projector.

Power indicator <ON (G)/STANDBY (R)>

Indicator status

Projector status

Off

The main power is switched off.

Red

Lit

The power is switched off. (standby mode)

Projection will start when the power on <

> button is pressed.

The setting of the projector is as follows.

The [PROJECTOR SETUP] menu

→

[QUICK STARTUP] is set to [OFF].

The projector may not operate when the light source indicators <LIGHT1>/<LIGHT2>

or the temperature indicator <TEMP> are blinking. (

page 177)

Blinking

The power is switched off. (standby mode)

Projection will start when the power on <

> button is pressed.

The setting of the projector is as follows.

The [PROJECTOR SETUP] menu

→

[QUICK STARTUP] is set to [ON].

The indicator will change to a red light when the specified time has elapsed after the

projector enters the standby mode if the projector is set as following.

The specified time is the time set in the [PROJECTOR SETUP] menu

→

[QUICK

STARTUP]

→

[VALID PERIOD].

The [PROJECTOR SETUP] menu

→

[QUICK STARTUP] is set to [ON].

The projector may not operate when the light source indicators <LIGHT1>/<LIGHT2>

or the temperature indicator <TEMP> are blinking. (

page 177)

Green

Lit

Projecting.

Orange

Lit

The projector is preparing to switch off the projector.

The power is switched off after a while. (Changes to the standby mode.)

Note

While the power indicator <ON (G)/STANDBY (R)> lights in orange, the fan is running to cool the projector.

For approximately five seconds after the projector is turned off, the indicator does not light up even if the power is turned on. Turn on the

power again after the power indicator <ON (G)/STANDBY (R)> lights/blinks in red.

Содержание PT-RZ870LBEJ





















































































































































































































Результаты поиска

Содержание PT-RZ870LBEJ

Отзывы:

Бренды по названию

Популярные бренды

Panasonic PT-RZ870LBEJ, Руководство по эксплуатации

Результаты поиска

Содержание PT-RZ870LBEJ

Отзывы:

Бренды по названию

Популярные бренды