Panasonic PT-RZ120LBU7, Руководство по эксплуатации, Страница: 138 / 220

Chapter 4 Settings — [PROJECTOR SETUP] menu
138 - ENGLISH
9) Press the <ENTER> button.
f
The
[COMMAND]
detailed screen is displayed.
10) Press
as
to select a [COMMAND].
f
For [COMMAND] which requires detailed settings, the items of the detailed settings will switch each time
you press
qw
.
f
When [INPUT] is selected, press the <ENTER> button, and then press
asqw
to select the input to be
set.
[COMMAND]
Detailed settings of
[COMMAND]
Description
[POWER ON] ― Switches on the projector.
[STANDBY] ― Enters standby.
[QUICK STARTUP]
[ON]
Enables the function of the [PROJECTOR SETUP] menu →
[QUICK STARTUP].
[OFF]
Disables the function of the [PROJECTOR SETUP] menu →
[QUICK STARTUP].
[SHUTTER]
[OPEN] Disables the shutter function (shutter: open).
[CLOSE] Enables the shutter function (shutter: closed).
[INPUT]
[RGB1]
Switches the input to RGB1.
[RGB2] Switches the input to RGB2.
[DVI-D] Switches the input to DVI-D.
[HDMI] Switches the input to HDMI.
[DIGITAL LINK] Switches the input to DIGITAL LINK.
[SDI]
Switches the input to SDI.
[INPUT1] - [INPUT10]
*1
Switches the input to DIGITAL LINK, and switches the input of the
Panasonic twisted-pair-cable transmitter to the specified input.
[OPERATING MODE]
*2
[NORMAL] Prioritizes luminance.
[ECO]
Controls the power to increase the life of the light source with higher
luminance.
[QUIET1]
Operates the projector with low noise although the luminance is
lower than that of [NORMAL].
[QUIET2]
Operates the projector with less noise although the luminance is
lower than that of [QUIET1].
[USER1] Controls the power with the setting set in [USER1].
[USER2] Controls the power with the setting set in [USER2].
[USER3] Controls the power with the setting set in [USER3].
*1 When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the projector, its input
name is automatically reflected from [INPUT1] to [INPUT10]. When an item that does not reflect the input name is selected, it will be disabled.
*2 If you change the settings while using the projector, the duration until the luminance decreases by half may shorten or the luminance may
decrease.
11) Press the <ENTER> button.
f
The command is fixed and
n
is displayed at the left of the selected command.
f
After the command is fixed, press the <MENU> button to close the detailed setting screen.
12) Press
asqw
to select [STORE], and press the <ENTER> button.
Note
f
To delete a command that has been already set, press the <DEFAULT> button on the remote control while the screen in Step 5) is
displayed, or select [DELETE] at the screen in Step 6) and press the <ENTER> button.
f
If multiple commands have been set for the same time, they are executed in chronological order starting from the smallest command
number.
f
The operating time will be the local time. (
x
page 136)
f
If an operation is executed with the remote control or control panel of the projector or with a control command before the command set in
[SCHEDULE] is executed, the command set with the schedule function may not be executed.