SECURITY menu
Settings
E
NGLISH - 43
SECURITY menu
Navigating through the MENU (
Æ
page 27),
select SECURITY from the main menu and then
select the required item from the sub-menu.
When you apply to the
z
SECURITY
menu for
the first time, you will be asked to perform the
password operation. Input the initial password by
pressing ▲►▼◄▲►▼◄ buttons in order and
then press the
ENTER
button.
Set the selected item with◄►buttons.
z
Remote control
Control panel
Note
Perform the above operation after the
z
SECURITY
menu is displayed.
If you have changed the password, input the new
z
password and press the
ENTER
button.
PASSWORD
You can activate the security system and the
password operation will be asked to perform when
projecting mode started.
Change setting
Change setting
OFF
Deactive
ON
Active
Remarks
PASSWORD
z
is set to
OFF
by default and when
initialised.
Change your password regularly. Do not use a
z
simple password that is too easy to guess.
Unless you perform the correct password operation,
z
all of the button controls will be disabled except the
POWER
button.
PASSWORD CHANGE
You can change the password operation to your original.
Press▲▼◄►buttons to change the
1 )
password.
(Up to eight button operations can be set.)
Press the ENTER button.
2 )
Input the password again and press
3 )
the ENTER button.
Remarks
The entered password operations will appear as
z
asterisks in the box.
If a series of button operation is incorrect, you will
z
be asked to perform again.
TEXT DISPLAY
You can set your original text to display regularly at
the bottom of the projected image while projecting.
Change setting
Change setting
OFF
Deactive
ON
Active
TEXT CHANGE
You can enter your original text to be displayed when
TEXT DISPLAY
is turned
ON
.
Press▲▼◄►buttons to select the required
1 )
character and press the ENTER button.
(You can input up to 22 characters.)
To delete all the entered characters, move the
cursor to
ALL DELETE
and press the
ENTER
button. To delete a character, press the
DEFAULT
button or move the cursor to the required
character then press the
DEFAULT
button.
ALL DELETE
OK
CANCEL
TEXT CHANGE
SPACE
Press▲▼◄►buttons to select OK and
2 )
press the ENTER button.
Select
CANCEL
or press the
MENU/RETURN
button to return to the previous menu without
setting.
