Panasonic PT-JX200HBU, Инструкция по эксплуатации

Страница: 123 / 152

Chapter 5 Operations — Web control function
ENGLISH - 123
Click [Detailed set up] → [Ping test].
1
2
3
4
1 [Input IP address]
Enter the IP address of the server to be tested.
2 [Submit] button
Executes the connection test.
3 Example of display when the connection has succeeded
4 Example of display when the connection has failed
[ECO management set up] page
Settings related to the ECO management function of the projector can be made.
Click [Detailed set up]
→ [ECO management set up].
3
4
5
2
1
1 [LIGHT POWER]
Selects the light source power setting.
2 [AV MUTE DETECTION]
Selects to enable ([ON])/disable ([OFF]) the AV mute detection
function.
3 [NO SIGNAL SHUT-OFF]
When [NO SIGNAL SHUT-OFF] is used, select the time until the
projector goes into the standby status.
4 [NO SIGNAL LIGHTS-OUT]
When [NO SIGNAL LIGHTS-OUT] is used, select the time until
the light source goes out.
5 [Submit] button
Updates the settings.
Note
f
For details of each setting item, refer to the [SETUP] menu → [ECO MANAGEMENT] (
x
page 75) of the projector.
[E-mail set up] page
When a problem occurs, an E-mail can be sent to the E-mail addresses (up to two) that have been set
beforehand.