Panasonic PT-JX200GBE, Руководство по эксплуатации

Страница: 97 / 151

Chapter 4 Settings — [SECURITY] menu
ENGLISH - 97
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (
x
page 58) for the operation of the menu screen.
f
When the projector is used for the first time
Initial password: Press
awsqawsq
in order, and press the <ENTER> button.
f
After selecting the item, press
asqw
to set.
Attention
f
When you select the [SECURITY] menu and press the <ENTER> button, entering a password is required. Enter the preset password and
then continue operations of the [SECURITY] menu.
f
When the password has been changed previously, enter the changed password, and press the <ENTER> button.
Note
f
The entered password is displayed with * marks on the screen.
f
An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
[SECURITY PASSWORD]
Display the
[SECURITY PASSWORD]
screen when the projector is turned on and projection is started from the
status that power of the track system was not supplied. If an incorrect password has been entered, operations
other than the power <
v
/
b
> button and the <AV MUTE> button become disabled.
1) Press
as
to select [SECURITY PASSWORD].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Disables the security password entry.
[ON] Enables the security password entry.
Note
f
[SECURITY PASSWORD] is set to [OFF] at the time of purchase or when [ALL USER DATA] in [INITIALIZE] (
x
page 80) has been
performed.
f
Change the password periodically that is hard to guess.
f
Security password is enabled when [SECURITY PASSWORD] is set to [ON] and the power supply to the projector is disconnected by
turning off the power supply of the track system.
[SECURITY PASSWORD CHANGE]
Change the security password.
1) Press
as
to select [SECURITY PASSWORD CHANGE].
2) Press the <ENTER> button.
f
The
[SECURITY PASSWORD CHANGE]
screen is displayed.
3) Press
asqw
and the number (<1> - <6>) buttons to set the password.
f
Up to eight button operations can be set.
4) Press the <ENTER> button.
5) Re-enter the password for the confirmation.
6) Press the <ENTER> button.
Note
f
The entered password is displayed with * marks on the screen.
f
If the remote control is lost after a security password has been set, initialization of the security password is required. Consult your dealer for
the method of initialization.