Panasonic PT-JX200GBE Скачать руководство пользователя страница 31

Страница: 31 / 151

Chapter 2

Getting Started — Installing/removing the projector

ENGLISH - 31

Installing/removing the projector

This section describes the mounting method of the projector to the track system and the setting method of the

orientation of the main unit.

Before mounting

The track systems compatible for mounting the projector are as follows.

Manufacturer

Nordic Aluminium

EUTRAC Stromschienen

ERCO

Name

GLOBAL Trac Pro tracks

Surface Track Standard

ERCO track

Type No.

XTS4100/XTS4200/XTS4300/

XTS4400

25-10/25-20/25-30/25-40

78301.000/78302.000/78303.000

/78304.000

Type No. of the track system and other information described above are as of November 2016.
For the latest information, visit the following the website.

URL http://panasonic.net/avc/projector/

Attention

Mount the projector only to specified track systems.

Please ask a qualified technician when setting up or replacing the track system.

It is recommended to mount the projector to the track system per manufacturer’s instructions.

Ensure that the projector is mounted to the track system by two people.

Before mounting/removing the projector, turn off the power of the track system.

Mount the projector to the track system which is installed in the horizontal ceiling or beam.

Do not install the projector to the following track systems.

Track system that is installed in the wall surface

Track system that is installed in the sloping ceiling or beam

Track system that cannot withstand the load

Track system that is installed on the floor

Cannot be installed

Ensure the installation part of the track system can withstand the weight of the projector. (

page 146)

If it is hard to operate the lever on the track mount parts A/B when mounting the projector, remove the projector from the track system

without turning the lever forcibly, displace the projector slightly and mount it again.

When installing more than two projectors to one track system, please reinforce the track system and the ceiling.

Note

The adapter of the projector cannot be mounted to the position of the tapping screw fixing the track system to the ceiling or beam.

When multiple projectors are mounted side by side, the brightness or the color may differ due to individual differences, even when the model

number is the same.

The model number of track system is subject to change without prior notice.

Содержание PT-JX200GBE
























































































































































Результаты поиска

Содержание PT-JX200GBE

Отзывы:

Бренды по названию

Популярные бренды

Panasonic PT-JX200GBE, Руководство по эксплуатации

Результаты поиска

Содержание PT-JX200GBE

Отзывы:

Бренды по названию

Популярные бренды