Panasonic PT-JX200GBE, Руководство по эксплуатации

Страница: 93 / 151

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 93
4) Press
as
to select each item, and press
qw
to change the settings.
[CONNECTION TYPE]
Selects the connection type for the MIRRORING function.
[PIN]
A PIN (8-digit number) will be displayed in the idle screen of the
MIRRORING function, and then makes connection by entering the
PIN on the device.
[AUTO]
If PIN connection is supported on the device, perform PIN
connection. If it is not supported, perform connection without a PIN.
[CHANNEL] Selects the communication channels used by Intel
®
WiDi / Intel
®
Pro WiDi / Miracast.
[LOWER BANDWIDTH MODE]
Enables / disables the lower bandwidth mode of Intel
®
WiDi or Intel
®
Pro WiDi.
[OFF] Disables the lower bandwidth mode.
[ON]
Enables the lower bandwidth mode. The bit rate will decrease, and
the image quality will reduce.
[MOBILE CONNECTION]
Use mobile devices as necessary when the connection is poor. Usually it is not necessary to use
mobile connection.
[OFF]
Disables mobile connection.
[ON] Enables mobile connection.
5) Press
as
to select [STORE], and press the <ENTER> button.
6) When the confirmation screen is displayed, press
qw
to select [OK], and press the <ENTER> button.
Note
f
For more information about Intel
®
WiDi or Intel
®
Pro WiDi conference mode, please refer to the HELP of Intel
®
WiDi or Intel
®
Pro WiDi
application, or visit the Intel Corporation website.
f
When switching from [SINGLE] to other items or from other items to [SINGLE] in the [MIRRORING] setting screen, the device may not be
connected. In this case, please eliminate the connection history with the projector at the device.