Chapter 4
Settings — [NETWORK] menu
ENGLISH - 123
5) When the confirmation screen is displayed, press
qw
to select [OK], and press the <ENTER> button.
[NETWORK STATUS]
Display the status of the projector network.
1) Press
as
to select [NETWORK STATUS].
2) Press the <ENTER> button.
f
The
[NETWORK STATUS]
screen is displayed.
[Art-Net SETUP]
Make settings to use the Art-Net function.
1) Press
as
to select [Art-Net SETUP].
2) Press the <ENTER> button.
f
The
[Art-Net SETUP]
screen is displayed.
3) Press
as
to select an item.
[Art-Net]
Sets to [ON] when you use the Art-Net function.
Sets to [OFF] when you do not use the Art-Net function.
[PORT ADDRESS]
Enter a port address where the projector processes Art-Net.
[START ADDRESS]
Enter a start address where the projector processes Art-Net.
4) Press
qw
to switch the setting.
5)
Press
as
to select [STORE], and press the <ENTER> button.
6)
When the confirmation screen is displayed, press
qw
to select [OK], and press the <ENTER> button.
Network connection
The projector has a network function, and the following operations are available from the computer using the web control.
f
Setting and adjustment of the projector
f
Display of the projector status
f
Setting of E-mail message to be sent
Attention
f
When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
f
A LAN cable is required to use the network function.
r
Example of a normal network connection
Computer
Projector
LAN cable (straight)
LAN cable (straight)
Hub
