Panasonic PT-DZ13KU, Руководство по обслуживанию, Страница: 59 / 121

DIS-12
2.10. Removal of Signal Processing Block (A/G/WF/WL-P.C.Board)
1. Remove the Terminal Cover according to the section 2.9. "Removal of Terminal Cover".
2. Unscrew the 4 screws and remove the Signal
Processing Block.
・
Unscrew the 3 screws and remove the WF-P.C.Board.
3. 1) Unscrew the 6 screws fixing a Terminal.
2) Unscrew the 5 screws and remove the G-P.C.Board.
・
Unscrew the 3 screws and remove the WL-P.C.Board.
・
Unscrew the 1 screw and remove the RW-P.C.Board.
XYN3+F8FJ
WF-P.C.Board
B to B connector (RW-P.C.B)
XYN3+F8FJ
RW-P.C.Board
XYN3+F8FJ
Signal Processing Block
THEC084N
Terminal Plate
G-P.C.Board
XYN3+F8FJ
B to B connector (A-P.C.Board)
*The G-P.C.Board is connected onto the A-P.C.Board
with the connector. Carefully when removing it.
XYN3+F8FJ
WL-P.C.Board
B to B connector (A-P.C.Board)