Chapter 4
Settings — [SECURITY] menu
132 - ENGLISH
2) Press the <ENTER> button.
f
The
[CONTROL DEVICE SETUP]
screen is displayed.
3) Press
as
to select [CONTROL PANEL] or [REMOTE CONTROL].
4) Press the <ENTER> button.
5) Press
as
to select [CONTROL PANEL] or [REMOTE CONTROL].
6) Press
qw
to switch [USER].
7) Press
as
to select the button item to set.
f
When [INPUT SELECT BUTTON] is selected, press the <ENTER> button, and then press
as
to select the button to set.
Buttons that can be set
[CONTROL PANEL]
[REMOTE CONTROL]
[POWER BUTTON]
Power standby <
v
> button, power on <
b
> button
[INPUT SELECT BUTTON]
<VIDEO> button, <RGB1/RGB2> button, or <RGB1/2> button, <DVI-D> button, <HDMI> button,
<DIGITAL LINK> button, and <SDI> button
*1
[MENU BUTTON]
<MENU> button
[LENS BUTTON]
<LENS> button
Lens (<FOCUS>, <ZOOM>, <SHIFT>) button
[AUTO SETUP BUTTON]
<AUTO SETUP> button
[SHUTTER BUTTON]
<SHUTTER> button
[ON SCREEN BUTTON]
—
<ON SCREEN> button
[OTHER BUTTON]
asqw
, <ENTER> button
Buttons not listed above
*1
Only for PT-DZ870E
8) Press
qw
to switch the item.
[ENABLE]
Enables button operations.
[DISABLE]
Disables button operations.
f
The following items are available only when [RGB1/2 BUTTON] of [INPUT SELECT BUTTON] is selected.
[TOGGLE]
Switches between RGB1 and RGB2 when the button is operated.
[RGB1]
Fixes to RGB1.
[RGB2]
Fixes to RGB2.
[DISABLE]
Disables button operations.
f
When [INPUT SELECT BUTTON] is selected in Step
7)
, and after the item is switched, press the <MENU> button to return to the
[CONTROL PANEL]
screen or the
[REMOTE CONTROL]
screen.
9) Press
as
to select [APPLY], and press the <ENTER> button.
f
The confirmation screen is displayed.
10) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
When a button operation is performed on the device set to [DISABLE], the
[CONTROL DEVICE PASSWORD]
screen is displayed.
Enter the control device password.
f
The
[CONTROL DEVICE PASSWORD]
screen will disappear when there is no operation for approx. 10 seconds.
f
If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot
enter standby).
f
When the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main
menu.
f
Even when button operation on the remote control is disabled, operation of the <ID SET> button on the remote control is enabled.
