Projected image
F
E
B
A
F
E
B
A
Weights and dimensions shown are approximate. Specifi cations and appearance are subject to
change without notice. Product availability differs depending on region and country.
This product may be subject to export control regulations.
The projection distances and throw ratios given in this brochure are for use only as guidelines.
For more detailed information, please consult the dealer from whom you are purchasing the product.
The PJLink trademark is an application trademark in Japan, the United States, and other countries
and regions or registered trademarks. DLP™ (Digital Light Processing), DLP™ Chip, DLP Medallion
Logo and DLP
TM
Link™ are trademarks or registered trademarks of Texas Instruments.
HDMI, the HDMI logo and High-Defi nition Multimedia Interface is a trademark or registered trademark of
HDMI Licensing LLC. Crestron and RoomView are registered trademarks of Crestron Electronics, Inc.
All other trademarks are the property of their respective trademark owners. Projection images simulated.
© 2013 Panasonic Corporation. All rights reserved.
Optional accessories
PT-CW330G1 Printed in Japan.
All information included here is valid as of January 2013.
*1 When [LAN (Standby)]/[VGA Out (Standby)]/[In Standby
Mode (Audio)] are all set to [Off].
*2 This is the maximum value when the lamp power is set to
Eco mode where the lamp is turned on for 2 hours and off
for 0.25 hours. If the lamp is turned on more times or kept
on for a long time, the lamp replacement cycle will shorten.
In Normal mode, the lamp replacement cycle is 3,000 hours.
The usage environment affects the duration of the lamp.
*3 Measurement, measuring conditions, and method of
notation all comply with ISO 21118 international standards.
*4 The above values are averages. Actual values may be
different according to the product.
*5 Power code (x2) for the PT-CW330EA/CW240EA/CX300EA
*6 This product is used together with an optional bracket
assembly (sold separately).
Diagonal
image size
Distance from
the edge of
the projection
window to the
screen (A)
Distance from
the projector
front to the
screen (B)
Height from
the edge of
the screen to
the top of the
projector (E)
Height from
the edge of the
screen to the
bottom of the
projector (F)
1.78
[70"]
0.52
(1.71')
0.18
(0.59')
0.16
(0.52')
0.24
(0.79')
2.03
[80"]
0.60
(1.97')
0.26
(0.85')
0.19
(0.62')
0.27
(0.89')
2.29
[90"]
0.68
(2.23')
0.34
(1.12')
0.23
(0.75')
0.30
(0.98')
2.54
[100"]
0.76
(2.49')
0.42
(1.38')
0.26
(0.85')
0.34
(1.12')
Diagonal
image size
Distance from
the edge of
the projection
window to the
screen (A)
Distance from
the projector
front to the
screen (B)
Height from
the edge of
the screen to
the top of the
projector (E)
Height from
the edge of the
screen to the
bottom of the
projector (F)
1.52
[60"]
0.52
(1.71')
0.19
(0.62')
0.18
(0.59')
0.26
(0.85')
1.78
[70"]
0.62
(2.00')
0.28
(0.92')
0.23
(0.75')
0.30
(0.98')
2.03
[80"]
0.71
(2.33')
0.38
(1.25')
0.27
(0.89')
0.34
(1.12')
2.29
[90"]
0.80
(2.62')
0.47
(1.54')
0.31
(1.02')
0.39
(1.28')
PT-CW330/CW240
(16:10 aspect ratio; throw ratio: 0.35:1)
PT-CX300
(4:3 aspect ratio; throw ratio: 0.44:1)
Ceiling mount
bracket
for high ceilings*
6
ET-PKV100H
Ceiling mount
bracket
for low ceilings*
6
ET-PKV100S
Wall mount bracket
ET-PKC200W
Replacement
lamp unit
ET-LAC300
Bracket assembly
ET-PKC200B
Replacement
lamp unit
ET-LAC200
*Exclusively for
PT-CW240
*Exclusively for
PT-CW330/CX300
Model
PT-CW330
PT-CW240
PT-CX300
Power supply
100 – 240 V AC, 50/60 Hz
Power consumption
340 W (0.5 W when STANDBY MODE set to ECO,*
1
6.0 W when STANDBY MODE set to NORMAL.)
310 W (0.5 W when STANDBY MODE set to ECO,*
1
6.0 W when STANDBY MODE set to NORMAL.)
340 W (0.5 W when STANDBY MODE set to ECO,*
1
6.0 W when STANDBY MODE set to NORMAL.)
DLP™
chip
Panel size
16.5 mm (0.65 inches) (16:10 aspect ratio)
14 mm (0.55 inches) (4:3 aspect ratio)
Display method
DLP™ chip x 1 DLP™ system
Pixels
1,024,000 (1,280 x 800) pixels
786,432 (1,024 x 768) pixels
Lens
Fixed/manual focus F = 2.6 f = –5.27 mm
Lamp
280 W UHM lamp (The lamp
replacement cycle is 4,000 hours*
2
)
240 W UHM lamp (The lamp
replacement cycle is 5,000 hours*
2
)
280 W UHM lamp (The lamp
replacement cycle is 4,000 hours*
2
)
Screen size (diagonal)
1.78 – 2.54 m (70 – 100 inches) (16:10 aspect ratio)
1.52 – 2.29 m (60 - 90 inch) (4:3 aspect ratio)
Color reproducibility
Full color (16.77 million colors)
Brightness*³
3100 lm
2600 lm
3100 lm
Center-to-corner uniformity*³
80%
Contrast*³
8000:1 (full on/off)(During RGB signal input, Lamp power:Normal)
Resolution
1,280 × 800 pixels
(Input signals that exceed this resolution will be converted to 1,280 × 800 pixels.)
1,024 × 768 pixels (Input signals that exceed this
resolution will be converted to 1,024 × 768 pixels.)
Scanning
frequency
HDMI
(Horizontal) 15–100 kHz; (Vertical) 24–120 Hz; (Dot clock) 25-162 MHz
RGB (analog)
(Horizontal) 15–100 kHz; (Vertical) 24–120 Hz; (Dot clock) 162 MHz or lower
YP
B
P
R
(YC
B
C
R
)
f
H
: 15.75 kHz, f
V
: 60 Hz [480i(525i)]
f
H
: 31.50 kHz, f
V
: 60 Hz [480p(525p)]
f
H
: 45.00 kHz, f
V
: 60 Hz [720(750)/60p]
f
H
: 33.75 kHz, f
V
: 60 Hz [1080(1125)/60i]
f
H
: 27.00 kHz, f
V
: 24 Hz [1080(1125)/24p]
Video/S-Video
(fH) 15.75/15.63 kHz (fV) 50/60 Hz [NTSC/NTSC4.43/PAL/PAL60/PAL-N/PAL-M/SECAM]
Keystone correction range
Vertical: ± 15°
Installation
Ceiling/fl oor, front/rear (Menu setting)
Built-in speaker
7 cm x 3 cm Oval x1 output power 10 W (Monaural)
Terminals
HDMI IN
(HDMI 19-pin) x 1 (Deep color, compatible with HDCP)
Audio signal Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
COMPUTER IN 1
D-sub HD 15-pin (female) x 1 [RGB/YP
B
(C
B
)/P
R
(C
R
) x 1]
COMPUTER IN 2
D-sub HD 15-pin (female) x 1 [RGB/YP
B
(C
B
)/P
R
(C
R
) x 1]
MONITOR OUT
D-sub HD 15-pin (female) x 1 (The signal selected from computer input 1/2 is output.)
VIDEO IN
Pin jack × 1
S-VIDEO IN
Mini DIN 4-pin × 1
COMPUTER AUDIO IN
M3 x 2 (L-R x 1)
VIDEO AUDIO IN
Pin jack x 2 (L-R x 1)
S-VIDEO AUDIO IN
Pin jack x 2 (L-R x 1)
AUDIO OUT
M3 x 1 (L-R x 1)
SERIAL IN
D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
LAN
(RJ-45) × 1 (for network connection, 100BASE-TX/10BASE-T, compliant with PJLink™ (class 1))
Mini USB
1 for servicemen
Cabinet materials
Molded plastic (PC)
Dimensions (W × H × D)
357 x 250 x 367 mm (14-1/16" × 9-27/32" × 14-29/64") (with legs at shortest position)
Weight
Approx.7.7 kg (17.0 lbs)*
4
Approx.7.5 kg (16.5 lbs)*
4
Approx.7.7 kg (17.0 lbs)*
4
Noise level
37 dB (Lamp power: Normal);
33 dB (Lamp power: Eco)
35 dB (Lamp power: Normal);
30 dB (Lamp power: Eco)
37 dB (Lamp power: Normal);
33 dB (Lamp power: Eco)
Operating environment
Operating temperature: 5° – 40°C(41° – 104°F) (Less than 762 m above sea level);
5° – 35°C(41° – 95°F) (762 – 1524 m above sea level)
5° – 30°C(41° – 86°F) (1524 – 3048 m above sea level)
Operating humidity: 20% - 80% (no condensation)
Supplied accessories
Power cord (3 m) x 1*
5
, Power cord cover x 1, Wireless remote control unit x 1, Lithium coin cell battery x 1, Computer cable (1.8 m) x 1
Projection distance
unit: meters (feet)
Dimensions
unit: mm (inch)
Specifi cations
Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fi re, malfunction or electric shock.
Caution
1 The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping
sound, or fail to illuminate, due to impact or extended use.
2 The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 500 mm (19-11/16 in) or more around the projector’s exhaust openings.
• If stacking projector units, care must be taken to provide the recommended space between units. These space
requirements also apply to installation where only one projector unit is operating at one time and the other unit is used
as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the
operating temperature listed in the specifi cations table during use. Also, make sure the projector’s intake and exhaust
openings are not blocked. Ensure there is suffi cient ventilation to prevent hot air from the exhaust openings being
recirculated into the intake opening.
3 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
4 Due to natural characteristics of lamps, screen brightness may fl uctuate. This is not an indication of faulty lamp performance.
NOTE ON USE
250(9-27/32)
357(14-1/16)
367(14-29/64)
f
H
: 15.63 kHz, f
V
: 50 Hz [576i(625i)]
f
H
: 31.25 kHz, f
V
: 50 Hz [576p(625p)]
f
H
: 37.50 kHz, f
V
: 50 Hz [720(750)/50p]
f
H
: 28.13 kHz, f
V
: 50 Hz [1080(1125)/50i]
f
H
: 67.50 kHz, f
V
: 60 Hz [1080(1125)/60p] f
H
: 56.25 kHz, f
V
: 50 Hz [1080(1125)/50p]
For more information about Panasonic projectors, please visit
Projector Global Web Site –
panasonic.net/avc/projector
Facebook –
www.facebook.com/panasonicprojector
YouTube –
www.youtube.com/user/PanasonicProjector