[LENS CONTROL] menu
ENGLISH
- 69
Settings
Select [LENS CONTROL] from the main menu
of “Navigating through the menu” (
page 37
),
and choose an item from the submenu.
After selecting an item, adjust the screen position
z
using the ▲▼◄ ► buttons.
Remote control
Projector controls
Note
When 3D is being displayed (including converting 2D to
z
3D), the [LENS CONTROL] cannot be executed. Perform
the operation after switching to 2D.
[ZOOM/FOCUS]
[ZOOM/FOCUS] test pattern 1 is displayed.
Adjust so that the pattern size and focus are correct.
PATTERN CHANGE
RETURN
FOCUS
ZOOM
Test pattern 1
Press the ◄► buttons to adjust the
1)
[ZOOM] and ▲▼ to adjust the [FOCUS].
Press the <ENTER> button.
2)
Test pattern 2 is displayed.
z
Recheck the focus.
Press the <ENTER> button once more to switch to
the input video, and press it once again to return to
test pattern 1.
PATTERN CHANGE
RETURN
FOCUS
ZOOM
Test pattern 2
Press the <RETURN> button or <MENU>
3)
button.
This returns you to the [LENS CONTROL] menu.
z
Note
The [ZOOM/FOCUS] test pattern displayed on last use is
z
displayed first.
If the projector or the screen is angled, the top and
z
bottom edges of the image will become out of focus.
Align the focus to the center of the screen.
If keystone distortion occurs, adjust [KEYSTONE] from
z
the [POSITION] menu.
(
page
6
0)
For details of how to control the lens with the remote
z
control, see “Managing the lens control settings” in
“Remote control operation”.
(
page
32
)
If a 3D video signal is input when the [ZOOM/FOCUS]
z
test pattern is being displayed, you are returned to the
normal screen.
During 3D video display, you can adjust the zoom and
z
focus with the <ZOOM/FOCUS> button on the device
controls.
[LENS MEMORY LOAD]
You can recall saved zoom/focus adjustment
positions, horizontal video position, vertical video
position, mask amount adjustment values, or aspect
ratio settings.
LENS MEMORY LOAD
LENS MEMORY1
LENS MEMORY2
LENS MEMORY3
LENS MEMORY4
LENS MEMORY5
LENS MEMORY6
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
Press the ▲▼ buttons to select the
1)
memory name to be recalled.
Press the <ENTER> button.
2)
The video adjustments for the recalled memory are
z
switched to.
Note
This lens memory function is not 100% guaranteed to
z
reproduce adjustments.
If the power is switched off during [LENS MEMORY
z
LOAD], when the power is switched back on may be in
the state before the power was switched off. In this case,
readjust the zoom and focus.
If a setting is not saved using [LENS MEMORY SAVE]
z
or all memories are deleted using [LENS MEMORY
DELETE] in the [LENS MEMORY EDIT] menu, the [LENS
MEMORY LOAD] menu will not be displayed.
[LENS CONTROL] menu
