manualshive.com logo in svg

Panasonic PT-44LCX65-K, Руководство по обслуживанию, Страница: 87 / 236

Поделиться
Скачать
Panasonic PT-44LCX65-K Скачать руководство пользователя страница 87

(Not used for service)

Select it for each 
adjustment

Do not press

CAUTION OF IC2301 REPLACEMENT:

EEPROM IC (IC2301) is supplied with the data written.
After replacing IC2301, Do not press "Self-Chk" and "Rom
Core."

Press

6. "Manu" indication will change to "Auto" indication, and

"Remote ON" indication will appear.
Confirm NUMLOCK is on. If not, turn on NUMLOCK by
pressing the NUMLOCK key on the 10-key keyboard.

7. Perform the necessary adjustment for the LCD Drive

C.B.A.

8. After completing adjustments, turn the remote off by

pressing DEL key. Then, end the software (1).

4) The following files will be created on "C:\Program

Files\Projector Checker." Software (1) installation is
complete.

3. Turn on the unit power.
4. To start up the software (1), select the "LCD Drive

Adjustment" on Program in Start menu.
The start-up menu will appear.

5. To turn the remote on, press DEL key.

PT-44LCX65-K / PT-52LCX65-K / PT-61LCX65-K

87

Содержание PT-44LCX65-K













































































































































































































































Отзывы:

Нет отзывов