32 English
Setting
Continued
[Setup] menu (display setting)
When this product is connected to the compatible display and the [Setup] menu is set, the following
functions can be used.
This section explains each setting using the display SQ1 series as an example. For settings on other
models, see the Panasonic information site.
■
Signal
Examples of [Signal] submenu screen
When HDMI is selected
30.00 Hz
297.00 MHz
3840x2160/30p
67.50 kHz
Signal
Cinema reality
YUV/RGB-in select
Noise reduction
Signal range
MPEG noise reduction
Dynamic backlight control
V-freq.
H-freq.
Dot clock freq.
Signal format
Off
YUV
Auto
Full(0-255)
Off
Off
HDCP status Protected
EDID select
4K/60p/HDR
Frame creation
Off
●
[EDID select]
This menu is displayed in HDMI 1 and HDMI 2 inputs. EDID data of each terminal is switched.
[
4K/60p/SDR
]:
Sets EDID compatible with 4K video signals (Max. 4 096 x 2 160 dots, Max. vertical scanning
frequency 60 Hz).
This EDID supports SDR (Standard Dynamic Range). HDR (High Dynamic Range) is not supported.
[
4K/60p/HDR
]:
Sets EDID compatible with 4K video signals (Max. 4 096 x 2 160 dots, Max. vertical scanning
frequency 60 Hz).
This EDID supports HDR (High Dynamic Range).
[
4K/30p
]:
Sets EDID compatible with 4K video signals (Max. 4 096 x 2 160 dots, Max. vertical scanning
frequency 30 Hz).
[2K]:
Sets EDID compatible with 2K video signals (Max. 1 920 x 1 200 dots).
Note
•This function is explained using the Panasonic display SQ1 series as an example. Depending on the model, the
setting items differ.
•When EDID is set to [4K/60p/SDR] or [4K/60p/HDR], images of 4K/30p are output.
•When the setting is changed, the image disappears for approx. 10 seconds, and then the specified image format is
output.
•When [Resolution] on the Web setting screen is set to something other than [Auto], the settings on this menu are not
reflected.
•When [Wireless presentation link] is set to [Off], the settings are not reflected until the receiver is restarted after this
menu is changed.
