13
Using "LED DISPLAY CHANGE BUTTON" on the front panel, you can switch the
following operations: indication of a connection status with a connected terminal
(Status mode), indication of communication speed at 1000 Mbps (GIGA mode),
indication of communication speed at 100 Mbps or 10 Mbps (Speed mode), indication
of transmission mode of full-duplex or half-duplex (DUPLEX mode), indication of a
port having a history of loop occurrence (Loop History mode), or turning off LEDs of
all ports (ECO mode).
LED DISPLAY CHANGE BUTTON
Mode at booting is called as Base mode. There are two types of Base modes, which
are Status mode (default setting at shipment) and ECO mode.
To switch the Base mode, keep pressing "LED DISPLAY CHANGE BUTTON" for 3
seconds or more.
When switching is done successfully, 5 LEDs of STATUS/ECO LED, GIGA LED, 100M
LED, and FULL LED are lighted once at the same time, they turned off, and then it
enters a Base mode. After switching to PoE mode, GIGA mode, Speed mode, DUPLEX
mode, or Loop History mode, and "LED DISPLAY CHANGE BUTTON" is not used for 1
minute, it automatically returns to Base mode (Status mode or ECO mode). Base
mode is held even if power supply was turned OFF.
How to switch the display using the LED DISPLAY CHANGE BUTTON
Two Base modes and other modes
2.1 LED display change
