Panasonic PN28480K-ID Скачать руководство пользователя страница 11

Страница: 11 / 18



PWR LED (Power)

Green Light

: Power is ON.

Off

: Power is OFF.



ANY/COL. LED (Collision)

Orange Light

: During half-duplex operation, packet collision is occurring in either

port.



STATUS/ECO LED (Status/ECO mode)

Green Light

: Operating in status mode.

Green Blink

: Operating in ECO mode.

All Port LEDs (left) are turned off.

Orange Light

: Starting

Orange Blink

: Malfunction (Contact the shop.)

Off

: Power is OFF.



GIGA LED (GIGA mode)

Green Light

: Operating in GIGA mode.



100M LED (Speed mode)

Green Light

: Operating in Speed mode.



FULL LED (DUPLEX mode)

Green Light

: Operating in DUPLEX mode.



LOOP HISTORY LED (Loop History mode)

Green Light

: Operating in Loop History mode.

Green Blink

: Loop is occurring, or occurred within the last 3 days.



LED DISPLAY CHANGE BUTTON

Using "LED DISPLAY CHANGE BUTTON" on the front panel, you can switch the

following operations: indication of a connection status with a connected terminal

(Status mode), indication of communication speed at 1000 Mbps (GIGA mode),

indication of communication speed at 100 Mbps or 10 Mbps (Speed mode), indication

of transmission mode of full-duplex or half-duplex (DUPLEX mode), indication of a port

having a history of loop occurrence (Loop History mode), or turning off LEDs of all ports

(ECO mode).

Mode at booting is called as Base mode.

There are two types of Base modes, which are Status mode (default setting at

shipment) and ECO mode.

To switch the Base mode, keep pressing "LED DISPLAY CHANGE BUTTON" for 3

seconds or more.

When switching is done successfully, 4 LEDs of STATUS/ECO LED, GIGA LED, 100M

LED, and FULL LED are lighted once at the same time, they turned off, and then it

enters a Base mode.

After switching to GIGA mode, Speed mode, DUPLEX mode, or Loop History mode,

and "LED DISPLAY CHANGE BUTTON" is not used for 1 minute, it automatically returns

to Base mode (Status mode or ECO mode).

Base mode is held even if power supply was turned OFF.

Power LED

Collision LED
Status/ECO mode LED

GIGA mode LED

Speed modeLED

DUPLEX mode LED

Loop History mode LED

LED DISPLAY
CHANGE BUTTON

Содержание PN28480K-ID



















Результаты поиска

Содержание PN28480K-ID

Отзывы:

Похожие инструкции для PN28480K-ID

Бренды по названию

Популярные бренды

Panasonic PN28480K-ID, Руководство по установке

Результаты поиска

Содержание PN28480K-ID

Отзывы:

Похожие инструкции для PN28480K-ID

Бренды по названию

Популярные бренды